Barrierta KL 092

Synthetic refrigeration compressor lubricant
Klüber Summit RAB 68 is based on synthetic hydrocarbon oils and special additives. It is very stable at high temperatures while providing excellent low temperature properties at evaporator temperatures below -45°C. The solubility with the refrigerants listed below is excellent and the deposit formation and foaming tendency is considerably reduced compared to naphthenic refrigeration compressor oils.

Special grease for Bowden cables, seals and plastics
UNISILKON GLK 112 ensures smooth running of components at low temperatures and is at the same time resistant to high temperatures. It is based on silicone oil and a special lithium soap. The product is compatible with many different elastomers (but not silicone rubber) and plastics. Approval VW TL 767 X

Dynamically light, long-term lubricating grease
ISOFLEX LDS 18 SPECIAL A is a dynamically light long-term grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. The product is resistant to ageing, oxidation and water, and it protects reliably against corrosion.

Low-temperature greases for slides and small gears
Kluberlub LM 41-32 N and Kluberlub LM 41-102 are special greases based on mineral oil and a lithium soap thickener. Due to their low base oil viscosity Kluberlub LM 41-32 N and Kluberlub LM 41-102 are suitable for temperatures down to –40°C.

Low-temperature greases for rolling and plain bearings
CENTOPLEX 1 DL/2 DL are low-temperature greases based on an oxidation-resistant mineral oil and a lithium-calcium soap. Due to the good resistance to working under normal temperatures and loads these greases can be used for long-term lubrication.

Synthetic long-term grease for rolling and plain bearings, linear motion guides
ISOFLEX TOPAS NCA 52 is a synthetic long-term grease with good low-temperature properties. It has a good load-carrying capacity and ensures smooth running even at high speeds and accelerations.
The thickener made of special calcium soap ensures good adhesion to the component and good resistance to media. The additives contained in ISOFLEX TOPAS NCA 52 increase wear protection.