Unisilkon TK M 1011

Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries
PARALIQ GB 363 offers excellent adhesion and is neutral to beer froth. It is also highly resistant to water and steam.
PARALIQ GB 363 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Special lubricating grease for drinking water, beverage and heating valves and fittings
UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. It is resistant to cold and hot water, superheated steam up to approx. 130°C as well as industrial cleaning agents and disinfectants. It is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products.

Special lubricating grease for drinking water taps containing e.g. EPDM and/or NBR elastomers
Klübersynth VR 69-252 N is a tailor-made, highly adhesive, light-colored lubricating grease based on fatty oil, calcium soap and PTFE. With a carefully selected combination of active substances, this lubricant offers very good performance and high functionality combined with a long service life. Klübersynth VR 69-252 N clearly surpasses the load alternation requirement of 200,000 cycles at a closing force of 2.5 Nm and is therefore in full compliance with the European standard DIN EN 200. Klubersynth VR 69-252 N meets the new drinking water and plastics guideline (KTW) of the German Umweltbundesamt (Federal Environmental Agency) and conforms to the current French positive list for drinking water applications ACS.

High-temperature long-term greases
BARRIERTA is Europe's oldest high-quality brand of high-temperature lubricants based on PFPE. Today the name of BARRIERTA is widely regarded as synonymous with long-term stability and thermal resistance.
We are committed to live up to this good reputation. BARRIERTA L55 series products are made from clearly specified raw materials and the production and quality of the end product is closely monitored.
BARRIERTA L series long-term greases offer excellent resistance to high temperature and aggressive media and at the same time compatibility with plastics and elastomers.

Special lubricating grease with EP additives, compatible with EPDM
SYNTHESO GLEP 1 is a special lubricant for a wide variety of applications with an almost neutral behaviour towards many elastomers (including EPDM) and plastics (except PC and ABS). SYNTHESO GLEP 1 can be used in a wide service temperature range and offers efficient protection against wear, good adhesion and resistance to water.

Synthetic sealing grease for the food-processing and pharmaceutical industries
Klubersynth UH1 64-2403 has been especially developed for the food-processing and pharmaceutical industries. Klubersynth UH1 64-2403 is resistant to hot and cold water and does not impair the formation of froth or the taste of beer.
Klubersynth UH1 64-2403 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. In addition this grease is Halal certified (HFCE) and related drinking water certificates such as UBA (DVGW-KTW), WRAS and NSF Standard 61 are available.