Special lubricating grease with EP additives, compatible with EPDM
SYNTHESO GLEP 1 is a special lubricant for a wide variety of applications with an almost neutral behaviour towards many elastomers (including EPDM) and plastics (except PC and ABS). SYNTHESO GLEP 1 can be used in a wide service temperature range and offers efficient protection against wear, good adhesion and resistance to water.
Benefits for your application
Special lubricating grease for the assembly and lifetime lubrication of elastomers
Almost neutral towards most sliding material pairings like EPDM/metal or plastic
High-temperature screw paste
Kluberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.
Kluberpaste HEL 46-450 is suitable for a temperature range between -40°C and 1000°C. In the normal temperature range (i.e. below 200°C) it shows good anticorrosion behaviour and good water resistance. Above 200°C it acts as a dry lubricant.
Water-miscible sliding dispersion for windscreen wipers made of synthetic or natural rubber and other elastomer components
Windscreen wiper blades are subject to extreme and sometimes conflicting requirements. On the one hand wiper blades have to be structurally stable enough to resist mechanical stress during operation, on the other hand they have to have sufficient flexibility to ensure a satisfactory wiping pattern is achieved in contact with the windscreen. Optimum frictional behavior, especially in the dry/wet friction regime, is therefore of vital importance. Kluberplus S 02-004 has been designed especially for optimization of the frictional behavior of wiper blades. A secondary benefit of the lubricant is that assembly of the wiper blades is also much easier. This also applies to the assembly of other components, such as O-rings etc.. Once applied, Kluberplus S 02-004 forms a dry, flexible, sliding film which ensures prevention of stick slip sliding with minimal lubricant transfer to the mating surface, e.g. the windscreen.
High-temperature and long-term grease for rolling bearings
Kluberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.
Synthetic long-term grease for rolling and plain bearings, linear motion guides
ISOFLEX TOPAS NCA 52 is a synthetic long-term grease with good low-temperature properties. It has a good load-carrying capacity and ensures smooth running even at high speeds and accelerations.
The thickener made of special calcium soap ensures good adhesion to the component and good resistance to media.
The additives contained in ISOFLEX TOPAS NCA 52 increase wear protection.
Low-temperature greases for slides and small gears
Kluberlub LM 41-32 N and Kluberlub LM 41-102 are special greases based on mineral oil and a lithium soap thickener. Due to their low base oil viscosity Kluberlub LM 41-32 N and Kluberlub LM 41-102 are suitable for temperatures down to –40°C.
Long-term and high-temperature grease for rolling bearings
PETAMO GHY 133 N is a high-performance lubricating grease for rolling bearings subject to high temperatures.
The high performance level of PETAMO GHY 133 N is achieved by means of selected product constituents such as polyurea thickener, mineral oil, synthetic hydrocarbon oil and additives, as well as the production technology.