Synthetic rolling and plain bearing greases
ISOFLEX TOPAS NB 52, NB 152 are rolling and plain bearing greases based on a synthetic hydrocarbon oil and a barium complex soap. The special barium-soap thickener used in the greases offers good load-carrying capacity as well as resistance to water and ambient media unlike other soap-based thickeners. Both products show good protection against corrosion as well as oxidation and ageing stability. The Kluber barium complex soap is ELINCS-registered and approved by GASG (Global Automotive Stakeholders Group).
Benefits for your application
Longer component life when exposed to water or aqueous media due to special thickener
Many years of successful use in the automotive and machine building industries
Water-miscible sliding dispersion for windscreen wipers made of synthetic or natural rubber and other elastomer components
Windscreen wiper blades are subject to extreme and sometimes conflicting requirements. On the one hand wiper blades have to be structurally stable enough to resist mechanical stress during operation, on the other hand they have to have sufficient flexibility to ensure a satisfactory wiping pattern is achieved in contact with the windscreen. Optimum frictional behavior, especially in the dry/wet friction regime, is therefore of vital importance. Kluberplus S 02-004 has been designed especially for optimization of the frictional behavior of wiper blades. A secondary benefit of the lubricant is that assembly of the wiper blades is also much easier. This also applies to the assembly of other components, such as O-rings etc.. Once applied, Kluberplus S 02-004 forms a dry, flexible, sliding film which ensures prevention of stick slip sliding with minimal lubricant transfer to the mating surface, e.g. the windscreen.
Water-miscible, two-component bonded coatings with different contents of solid matter for automotive body seals
Klubertop TP 22-1310 N /A/B and Klubertop TP 27-1310 are black two-component bonded coating cross-linking at ambient temperature which contain special solid matter and an organic, water-miscible binding agent. The bonded coating offers good adhesion to e.g. EPDM, TPE, FPM, PUR etc.
High-temperature chain oils
All chain users aim at minimising lubricant consumption volumes to enhance their profitability. At the same time, they expect good wear protection and low residue formation to keep maintenance costs low.
Our synthetic ester oils clearly meet these requirements. With our Klubersynth CH 2 series, we have found the right solution for you.
Lubricating and assembly paste
ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants.
Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.
High-temperature screw paste
Kluberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.
Kluberpaste HEL 46-450 is suitable for a temperature range between -40°C and 1000°C. In the normal temperature range (i.e. below 200°C) it shows good anticorrosion behaviour and good water resistance. Above 200°C it acts as a dry lubricant.
Universal high-performance lubricant
MICROLUBE GB 0 is a special mineral oil based lubricant. It has a high pressure absorption capacity, provides excellent protection against wear and corrosion, and shows a good wetting behaviour and water resistance.
