Kluber Silvertex W 22

Manufacturer: KLÜBER LUBRICATION (Germany)

Biodegradable high-performance needle and sinker oils
In the knitting industry, requirements in terms of consistent product quality, compatibility of materials, wear protection and scourability are becoming more and more stringent. Kluber Silvertex W needle oils are based on special mineral base oils and additives. These oils are biodegradable according to OECD - 301 c. They reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time reducing operating costs.

Benefits for your application

Comply with the legal requirements set forth in EU Directive 2003/53/EC for placing NP/NPE-containing products on the market
Long service life of stitch-forming elements due to good wear protection and damping effect
Compatible with electronic control systems, elastane fibres and commonly used sealing materials and plastics due to the special base oils and additives
Higher economical efficiency of knitting machines due to reduced downtime
Reduction of operating costs due to extended maintenance intervals

Orther products

Product

Features, Application

Klubersynth GEM 4-32….1500 N

Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Klubersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on PAO. Klubersynth GEM 4 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GEM 4 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.

Kluber Madol 172 Supreme, 183 Supreme

Needle and sinker oils for hosiery and flat-bed knitting machinery
Kluber Madol 100 oils based on special mineral base oils and additives.
They ensure reliable wetting of the friction points in your knitting machine, keep needle grooves clean and extend the needle life.
The oils' good oxidation stability contribute to reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time keeping maintenance costs to a minimum.

Hotemp 2000

High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250 °C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.

Kluberoil GEM 1-46...1000 N

High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology
Kluberoil GEM 1 N is a high-performance gear and multipurpose oil based on mineral. Kluberoil GEM 1 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Kluberoil GEM 1 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.

Kluberfood NH1 C 6-150

Synthetic oil for chains in can lacquering lines for the food-processing industry
Kluberfood NH1 C 6-150 is a special synthetic high-temperature oil on a PG base developed for the lubrication of chains operating through can and tin-plate curing, lacquering and decorating ovens.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.

Isoflex PDP 65

Synthetic long-term oils
ISOFLEX PDP oils are synthetic long-term oils based on ester oil. They show a good viscosity-temperature behaviour, a high flash point, a low pour point, good aging and oxidation stability as well as corrosion protection. Compared to mineral oils, they hardly change their viscosity at low or high temperatures thus ensuring less decrease in performance and reduced power consumption.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416