Kluber Summit SB 46, 68

Manufacturer: KLÜBER LUBRICATION (Germany)
Synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Kluber Summit SB oils are air compressor oils based on synthetic hydrocarbons and additives. These oils are miscible with mineral oils and synthetic hydrocarbon oils, but not with oils based on polyglycol.
Kluber Summit SB oils offer excellent oxidation and ageing stability and show a good viscosity-temperature behaviour.
Benefits for your application
  • Low maintenance and operating costs due to extended oil change intervals up to 8,000 operating hours in oil-injected screw-type compressors.
  • Easy compressor oil conversion due to neutral behaviour of oils towards seals.
  • Low tendency to evaporation and thus low impact of the oil vapour on the compressed air.
  • Longer servie life of the oil filters, activated carbon filters and oil separators. Low formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter and separator life
Used for compressors air machine: Atlas Copco, Kaeser, Boge, Hitachi, Kobelco, Fusheng…

Orther products

Product
Features, Application
Semi-synthetic, biodegradable, high-performance needle and sinker oils
In the knitting industry, compatibility of materials, wear protection and scourability are becoming more and more stringent. Kluber Silvertex T needle oils are based on special mineral and synthetic base oils and additives. These oils are biodegradable according to OECD - 301 c. They reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time reducing operating costs.
High-temperature oil for continuous wood panel presses
HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds.
HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP... series with further development in terms of evaporation losses at temperatures between 230 and 260 °C.
Hotemp 2000

Hotemp 2000

Mã SP:
High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250 °C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.
Isoflex PDP 65

Isoflex PDP 65

Mã SP:
Synthetic long-term oils
ISOFLEX PDP oils are synthetic long-term oils based on ester oil. They show a good viscosity-temperature behaviour, a high flash point, a low pour point, good aging and oxidation stability as well as corrosion protection. Compared to mineral oils, they hardly change their viscosity at low or high temperatures thus ensuring less decrease in performance and reduced power consumption.
High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology
Kluberoil GEM 1 N is a high-performance gear and multipurpose oil based on mineral. Kluberoil GEM 1 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Kluberoil GEM 1 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.
Synthetic high-performance gear and high-temperature oil with KluberComp Lube Technology
Klubersynth GH 6 is a synthetic high-performance gear and high-temperature oil based on polyglycol. It includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GH 6 is approved by Siemens-Flender, SEW, MAAG Gears, etc.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16