Kluberoil 4 UH1-100 N

Manufacturer: KLÜBER LUBRICATION (Germany)

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries
Kluberoil 4 UH1 N is a synthetic high-performance gear and multipurpose oil based on PAO satisfying the growing requirements and increasing power density of modern gears.
These are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Benefits for your application

Registered as NSF H1 and certified according to ISO 21469
High scuffing protection
Good wear protection for gears and rolling bearings
Good shear stability for reliable lubricant film formation
Excellent ageing and oxidation resistance
Wide service temperature range due to good viscosity-temperature behaviour
Low foaming tendency
Energy savings due to optimised friction behaviour
Good elastomer compatibility
Approved by numerous gear OEMs: SEW, Getriebebau Nord, Sumitomo, etc.

Orther products

Product

Features, Application

Kluberfood NH1 94-301

Synthetic lubricating grease for the food processing and pharmaceutical industries
Kluberfood NH1 94-301 is a special lubricating grease composed of a highly refined synthetic hydrocarbon base oil and calcium complex thickener. This lubricant is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570

Klubersynth UH1 14-222

Synthetic lubricating grease for universal application in the food-processing and pharmaceutical industries
Klubersynth UH1 14-222 was developed for the special requirements of the food-processing and pharmaceutical.
Klubersynth UH1 14-222 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Kluber Summit HySyn FG 46

Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Kluber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.
The oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.
They are NSF H1 registered.

Paraliq GB 363

Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries
PARALIQ GB 363 offers excellent adhesion and is neutral to beer froth. It is also highly resistant to water and steam.
PARALIQ GB 363 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Klubersynth UH1 64-1302

Synthetic lubricating grease for the food and pharmaceutical industry
Klübersynth UH1 64-1302 was specifically developed for grease-lubricated roller chains operating under high loads in the mixed friction regime in continuous flow sterilizers. Klübersynth UH1 64-1302 thus offers excellent wear protection even under extreme lubricating conditions.
Being highly resistant to water and steam, this adhesive lubricating grease is particularly suitable for applications in a saturated steam atmosphere at normal sterilisation temperatures.

Kluberfood 4 NH1-32

Synthetic hydraulic oils for the food and pharmaceutical industries
Kluberfood 4 NH 1-15...100 oils are hydraulic oils based on synthetic hydrocarbons. Klüberfood NH 1 oils offer good oxidation stability due to the synthetic base oil, also good stability at low temperatures and protection against friction and wear. They meet HLP requirements acc. to DIN 51524 part 2.
Apart from their excellent corrosion stability, Kluberfood 4 NH 1 oils have a good water separation ability.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416