Klubersynth 50 KV, 80 KV, 100 KV

Manufacturer: KLÜBER LUBRICATION (Germany)

Synthetic high-performance gear oils for weaving machines
In modern weaving machines, high-performance gear oils are expected to enable longer maintenance intervals at high production speeds.
It is with this trend in mind that we developed our Klubersynth 50 KV, 80 KV and 100 KV oils. These are synthetic high-performance gear oils based on polyglycol. They are resistant to ageing, protect reliably against wear and offer an excellent load-carrying capacity as well as viscosity-temperature behaviour.

Benefits for your application

Exclusively recommended for Leonardo weaving machines from ITEMA. With Klubersynth 50 KV, 80KV, 100 KV oils, these weaving machines attain an optimum service life. Oil change every 20,000 operating hours only.
Cost reduction due to very good friction behaviour of the polyglycol base oil reducing power losses and improving efficiency.
Reduced maintenance costs due to high scuffing load strength and good antiwear effect protecting gears and other lubricated components sufficiently against scuffing even at high peak loads.
Excellent viscosity-temperature behaviour enables higher operational reliability due to sufficient component lubrication even at elevated or high machine temperatures.

Orther products

Product

Features, Application

CENTOPLEX 2

Multi-purpose greases for rolling and plain bearings
CENTOPLEX 2 and 3 are multi-purpose greases based on oxidation-resistant mineral oils and lithium soap. They meet the rolling bearing grease requirements according to DIN 51825 K. Due to the good resistance to working under normal temperatures and loads these greases can be used for long-term lubrication. The more viscous CENTOPLEX of NLGI grade 3 is to be used for bearings with inclined or vertical shafts or insufficiently sealed bearings.

ISOFLEX PDP 65

Synthetic long-term oils
ISOFLEX PDP oils are synthetic long-term oils based on ester oil. They show a good viscosity-temperature behaviour, a high flash point, a low pour point, good aging and oxidation stability as well as corrosion protection. Compared to mineral oils, they hardly change their viscosity at low or high temperatures thus ensuring less decrease in performance and reduced power consumption.

Kluber Madol 920 N

Easily scourable, wear-protecting needle and sinker oils
Kluber Madol 920 N oil based on special mineral base oils and additives.
It ensure reliable wetting of the friction points in your knitting machine, keep needle grooves clean and extend the needle life.
The oil' good oxidation stability contribute to reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time keeping maintenance costs to a minimum.

Kluber Summit Varnasolv

Concentrated, synthetic conditioner for compressors, hydraulic systems, gears and other oil circulation systems
Kluber Summit Varnasolv is a concentrated conditioner fluid containing synthetic ester oil and cleaning additives. It is miscible with mineral oils, synthetic hydrocarbons, ester oils and polyglycols.

Klubersynth HBE 94-401

Synthetic heavy-duty grease for long-term lubrication
Klubersynth HBE 94-401 is a lubricating grease based on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanical loads providing excellent wear protection. Moreover, Klubersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used.

Isoflex LDS 18 Special A

Dynamically light, long-term lubricating grease
ISOFLEX LDS 18 SPECIAL A is a dynamically light long-term grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. The product is resistant to ageing, oxidation and water, and it protects reliably against corrosion.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416