Klubertop TM 06-111

Manufacturer: KLÜBER LUBRICATION (Germany)
Thermosetting bonded coating for high loads and good corrosion protection
Once applied and hardened, the coating ensures:
  • good wear resistance
  • excellent corrosion protection
  • wide service temperature range
  • no stick-slip at low relative speeds
  • excellent wear protection on zinc-phosphated surfaces
Benefits for your application
  • Cost savings due to wear and corrosion protection also under high loads
    • long component life due to good surface smoothening at high loads
    • highly resistant at high loads in combination with corrosive influences
    • low friction coefficients at high loads
  • Clean and dry surfaces with lubricating effect
    • no contamination by fluid lubricant
    • no sticking of lubricated components during automated assembly
    • lubricant firmly incorporated, no risk of lubrication starvation in the friction point

Orther products

Product
Features, Application
Altemp Q NB 50

Altemp Q NB 50

Mã SP:
Lubricating and assembly paste
ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants.
Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.
Syntheso GLEP 1

Syntheso GLEP 1

Mã SP:
Special lubricating grease with EP additives, compatible with EPDM
SYNTHESO GLEP 1 is a special lubricant for a wide variety of applications with an almost neutral behaviour towards many elastomers (including EPDM) and plastics (except PC and ABS). SYNTHESO GLEP 1 can be used in a wide service temperature range and offers efficient protection against wear, good adhesion and resistance to water.
High-temperature lubricating greases
STABUTHERM GH 461 and STABUTHERM GH 462 are high-temperature lubricating greases based on mineral oil and polyurea. They have a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. They have feature highly effective anti-wear properties. The greases are very adhesive and resistant to water both under static and dynamic load. They are resistant to oxidation and provide reliable protection against corrosion.
Lubricant for rolling and plain bearings subject to high loads
Kluberplex BEM 41-141 offers good pressure and wear resistance and does not contain any inorganic solid lubricants like MoS2 or graphite.
Due to its good compatibility with commercial sealing materials, the grease can be used for a wide range of applications.
Special low-temperature greases
ISOFLEX TOPAS L 32 and L 32 N have been designed for extremely low temperatures. These greases consist of a synthetic hydrocarbon oil and a special lithium soap. ISOFLEX TOPAS L 32 and L 32 N are resistant to ageing and oxidation and provide good corrosion protection as well as water resistance.
ISOFLEX TOPAS L 32 N also contains a UV indicator, which ensures quality checking even with minimum quantity lubrication.
High-temperature lubricating grease for low-noise rolling bearings
ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16