Kluberplex BEM 41-141

Eco-compatible operating lubricant for open gear drives
Kluberbio LG 39-701 N is a high-performance grease with a new type of base oil and additive package. It combines very good eco-friendliness with high load-carrying capacity, good antiwear and anticorrosive effect and excellent adhesion to surfaces.
The high-viscosity base oil of Kluberbio LG 39-701 N comes from 100 % renewable resources.
Kluberbio LG 39-701 N complies with the 2013 Vessel General Permit requirements of the Environmental Protection Agency (EPA) in terms of biodegradability, minimal toxicity and bio-accumulation to be met by Environmentally Acceptable Lubricants.
Due to the lubricant's excellent low-temperature behaviour, it can be pumped in centralised lubricating systems down to -30°C and sprayed even below 0°C. These positive product characteristics enable you to use the lubricant over a wider temperature range than is common with mineral-oil-based greases of the same base oil viscosity.

High-temperature and long-term grease for rolling bearings
Kluberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.

Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Klubersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on PAO. Klubersynth GEM 4 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GEM 4 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.

Synthetic high-performance gear and high-temperature oil with KluberComp Lube Technology
Klubersynth GH 6 is a synthetic high-performance gear and high-temperature oil based on polyglycol. It includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GH 6 is approved by Siemens-Flender, SEW, MAAG Gears, etc.

Lubricating and assembly paste
ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants.
Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.

Special cleaning grease for rolling bearing applications
For you as an operator of wind power plants, downtime means high costs and laborious maintenance. Downtime is often due to rolling bearing damage caused by hardened residues. Klubersynth BZ 68-400 is a solution destined precisely for this problem. As the cleaning grease removes these residues, bearing life is extended and downtime for maintenance reduced.
When developing Klubersynth BZ 68-400, particular care was taken to ensure it is compatible with other base oils for maximum versatility. Besides the good cleaning effect that removes residues from rolling bearings, Klübersynth BZ 68-400 offers good protection against wear and corrosion. Due to this combined effect, cleaning of the rolling bearings can take place during operation.