Low-temperature greases for slides and small gears
Kluberlub LM 41-32 N and Kluberlub LM 41-102 are special greases based on mineral oil and a lithium soap thickener. Due to their low base oil viscosity Kluberlub LM 41-32 N and Kluberlub LM 41-102 are suitable for temperatures down to –40°C.
Benefits for your application
Good low-temperature properties
Self-locking effect in worm gears
Good corrosion protection
Pumpable through centralized lubrication equipment
Synthetic low-temperature grease with good damping properties
Klubersynth LI 44-22 is a fully synthetic, dynamically light low-temperature grease with good damping and adhesion properties as well as water resistance. It is based on synthetic hydrocarbons, lithium soap, antifriction solid lubricants as well as corrosion and oxidation inhibitors. Klubersynth LI 44-22 is almost neutral towards many plastics and elastomers.
Special lubricating greases for boundary friction conditions and tribo-corrosion
MICROLUBE GL 261, GL 262 greases are special lubricating greases on a mineral oil base, special lithium soap and the MICROLUBE additive package. Running-in wear is reduced to a minimum. In addition, the MICROLUBE additive package provides protection in the boundary friction regime, thus preventing tribo-corrosion. These greases have the capacity to absorb high pressures, and they have good anti-corrosion properties.
Special synthetic lubricating greases for a wide application range
The product series POLYLUB GLY 151, 501, 801 is based on a synthetic hydrocarbon oil, mineral oil and special lithium soap. It comprises three lubricating greases reducing friction and wear in plain bearings, slideways and small gears made of plastic.
Special lubricating greases for elastomers
SYNTHESO GLK 0 and GLK 1 are special lubricating greases for a wide variety of applications with an almost neutral behaviour towards many elastomers (also EPDM) and plastics. Both products offer excellent wear protection, high load-carrying capacity, good adhesion and resistance to water.
Mineral oil-based special lubricants
STRUCTOVIS HD is a special lubricant series based on mineral oil and available in different viscosity grades.
All STRUCTOVIS HD types offer good wear and corrosion protection. The STRUCTOVIS types provided with an adhesion improver are extremely adhesive thus reducing considerably the risk of contamination due to oil leakage, especially at high chain speeds. The STRUCTOVIS types of higher viscosity (AHD to CHD) may also reduce noise of chains.
Water-miscible sliding dispersion for windscreen wipers made of synthetic or natural rubber and other elastomer components
Windscreen wiper blades are subject to extreme and sometimes conflicting requirements. On the one hand wiper blades have to be structurally stable enough to resist mechanical stress during operation, on the other hand they have to have sufficient flexibility to ensure a satisfactory wiping pattern is achieved in contact with the windscreen. Optimum frictional behavior, especially in the dry/wet friction regime, is therefore of vital importance. Kluberplus S 02-004 has been designed especially for optimization of the frictional behavior of wiper blades. A secondary benefit of the lubricant is that assembly of the wiper blades is also much easier. This also applies to the assembly of other components, such as O-rings etc.. Once applied, Kluberplus S 02-004 forms a dry, flexible, sliding film which ensures prevention of stick slip sliding with minimal lubricant transfer to the mating surface, e.g. the windscreen.