Water-miscible PTFE dispersion
Kluberplus S 03-105 is a white, air-drying PTFE dispersion in an organic binding agent. Once applied and dried, the dispersion provides good wear resistance, has a low friction coefficient, and ensures smooth operation at low speeds. The dispersion dries very quickly in spite of the water contained in the solvent. Adhesion on iron, non-ferrous metals, plastic materials (e.g. ABS, PC, PVC, PU, PA, PS), and elastomers (e.g. NBR, FKM, SBR, EPDM) is good.
Klubertop TP 38-901 is a water-miscible, thermosetting for the food-processing, drinking water and pharmaceutical industries.
The dry film provided by Klubertop TP 38-901 fulfils the following requirements:
European and German regulations on food-grade products (FABES certificate CON 6222-2018).
Klubertop TP 38-901 is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
Water-miscible, two-component bonded coatings for automotive body seals
Klubertop TP 22, 27 and 31-1310 A/B are air-hardening, black two-component bonded coatings with varying solid matter content plus an organic, water-miscible binding agent. The products offer good adhesion to e.g. EPDM, TPE, FPM, PUR.
Water-miscible, two-component bonded coatings with different contents of solid matter for automotive body seals
Klubertop TP 22-1310 N /A/B and Klubertop TP 27-1310 are black two-component bonded coating cross-linking at ambient temperature which contain special solid matter and an organic, water-miscible binding agent. The bonded coating offers good adhesion to e.g. EPDM, TPE, FPM, PUR etc.
Water-miscible two-component structural bonded coating for highly stressed profiled seals in motor vehicles
Klubertop TP 37-1310 A/B P is an air-drying, water-miscible two-component bonded coatings with an excellent friction and wear behaviour.
Klubertop TP 37-1310 A/B P offers excellent adhesion on all kinds of elastomer types such as EPDM, TPE, FPM, PUR etc.
Thermosetting bonded coating
Klubertop TG 05 N is a thermo-setting, grey-black bonded coating based on graphite and an organic binding agent. Once applied and hardened, the coating forms a dry lubricant layer which has a very wide service temperature range and a low friction coefficient, ensures that there is no stick slip at low speeds, has a long service life and is very resistant to wear. In addition, this product has an excellent resistance to oil, and chemicals. It also provides good corrosion protection on phosphated surfaces.
