Klubertop TP 31-1310 A/B

Manufacturer: KLÜBER LUBRICATION (Germany)
Water-miscible two-component structural bonded coating for highly stressed profiled seals in motor vehicles
Klubertop TP 37-1310 A/B P is an air-drying, water-miscible two-component bonded coatings with an excellent friction and wear behaviour.
Klubertop TP 37-1310 A/B P offers excellent adhesion on all kinds of elastomer types such as EPDM, TPE, FPM, PUR etc.
Benefits for your application
  • High wear resistance, excellent stick-slip and noise reduction behaviour
  • Less costs and time needed to prepare application because
    • no filter systems needed due to low VOC content
    • application onto hot seals up to 180°C possible; no intermediate cooling required
    • quick drying allows high production speeds
    • no plasma pretreatment necessary due to integrated adhesion additives
  • Quick quality control of the coating after the application by integrated UV indicator stimulated at 300-400 nm

Orther products

Product
Features, Application
Water-miscible two-component bonded coating for sealing rings and coloured elastomers
Klubertop TP 36-1300 NP A/B is a colourless two-component bonded coating for elastomers and thermoplastics.
Klubertop TP 36-1300 NP A/B forms a nearly colourless dry film, it is particularly suitable for coloured seals and O-rings where increased operational reliability and colour fastness are equally important.
The bonded coating offers excellent adhesion on materials like EPDM, TPE, NBR, HNBR, FPM and PA.
Single-component, air-drying bonded coating for flocked seals
Klubertop TP 18-810 N is an air-drying, water-based bonded coating.
 
Water-based heat-setting single-component bonded coating free from co-solvent for visible elastomers
Klubertop TP 28-1311 is a black, single-component bonded coating for elastomers. It is a heat-setting lubricant and therefore particularly suitable for online application on sponge and conventional rubber profiles.
One of the main advantages of this product is its good adhesion on various elastomers.
Two-component bonded coating for metal components
Klubertop TP 42 N A-B is a thermosetting, two-component, black-coloured bonded coating. It has an organic binder containing PTFE-free wear protection additives.
Klubertop TP 42 N A-B reduces friction and wear in metal/metal combinations. It has a particularly high level of wear resistance and a relatively high friction coefficient for a bonded coating.
Water-miscible, two-component bonded coatings with different contents of solid matter for automotive body seals
Klubertop TP 22-1310 N/A/B and Klubertop TP 27-1310 are black two-component bonded coating cross-linking at ambient temperature which contain special solid matter and an organic, water-miscible binding agent. The bonded coating offers good adhesion to e.g. EPDM, TPE, FPM, PUR etc.
Water-miscible, thermo-setting PTFE-based bonded coating for low to medium loads
Klubertop TP 46-111 is a thermosetting, black bonded coating based on polytetrafluoroethylene (PTFE) and an organic, water-dilutable binder.
Klubertop TP 46-111 is a ready-to-use fluid containing water as a solvent.
Adhesion to metals and various plastics is good.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16