Water-miscible two-component bonded coating for sealing rings and coloured elastomers
Klubertop TP 36-1300 NP A/B is a colourless two-component bonded coating for elastomers and thermoplastics.
Klubertop TP 36-1300 NP A/B forms a nearly colourless dry film, it is particularly suitable for coloured seals and O-rings where increased operational reliability and colour fastness are equally important.
The bonded coating offers excellent adhesion on materials like EPDM, TPE, NBR, HNBR, FPM and PA.
Two-component bonded coating for metal components
Klubertop TP 42 N A-B is a thermosetting, two-component, black-coloured bonded coating. It has an organic binder containing PTFE-free wear protection additives.
Klubertop TP 42 N A-B reduces friction and wear in metal/metal combinations. It has a particularly high level of wear resistance and a relatively high friction coefficient for a bonded coating.
Water-miscible two-component structural bonded coating for highly stressed profiled seals in motor vehicles
Klubertop TP 37-1310 A/B P is an air-drying, water-miscible two-component bonded coatings with an excellent friction and wear behaviour.
Klubertop TP 37-1310 A/B P offers excellent adhesion on all kinds of elastomer types such as EPDM, TPE, FPM, PUR etc.
Water-miscible, two-component bonded coatings with different contents of solid matter for automotive body seals
Klubertop TP 22-1310 N/A/B and Klubertop TP 27-1310 are black two-component bonded coating cross-linking at ambient temperature which contain special solid matter and an organic, water-miscible binding agent. The bonded coating offers good adhesion to e.g. EPDM, TPE, FPM, PUR etc.
Water-miscible, thermo-setting PTFE-based bonded coating for low to medium loads
Klubertop TP 46-111 is a thermosetting, black bonded coating based on polytetrafluoroethylene (PTFE) and an organic, water-dilutable binder.
Klubertop TP 46-111 is a ready-to-use fluid containing water as a solvent.
Adhesion to metals and various plastics is good.
Thermosetting bonded coating
Klubertop TG 05 N is a thermo-setting, grey-black bonded coating based on graphite and an organic binding agent. Once applied and hardened, the coating forms a dry lubricant layer which has a very wide service temperature range and a low friction coefficient, ensures that there is no stick slip at low speeds, has a long service life and is very resistant to wear. In addition, this product has an excellent resistance to oil, and chemicals. It also provides good corrosion protection on phosphated surfaces.
Water-based heat-setting single-component bonded coating free from co-solvent for visible elastomers
Klubertop TP 28-1311 is a black, single-component bonded coating for elastomers. It is a heat-setting lubricant and therefore particularly suitable for online application on sponge and conventional rubber profiles.
One of the main advantages of this product is its good adhesion on various elastomers.