Klubertop TP 27-1310 N A/B

Two-component bonded coating for metal components
Klubertop TP 42 N A-B is a thermosetting, two-component, black-coloured bonded coating. It has an organic binder containing PTFE-free wear protection additives.
Klubertop TP 42 N A-B reduces friction and wear in metal/metal combinations. It has a particularly high level of wear resistance and a relatively high friction coefficient for a bonded coating.

Two-component bonded coating for metal components
Klubertop TP 41 N A/B is a thermosetting, black-coloured high-performance bonded coating made up of two component parts. It has an organic binder containing PTFE-free solid lubricants.
This bonded coating reduces friction and wear on metal/metal and metal/plastic material pairings. It can be used for high mechano-dynamic loads as well as with high temperatures.
Klubertop TP 41 N A/B excels due to its excellent high wear resistance plus good adhesion on steel and aluminium substrates.

Water-miscible two-component bonded coating for sealing rings and coloured elastomers
Klubertop TP 36-1300 NP A/B is a colourless two-component bonded coating for elastomers and thermoplastics.
Klubertop TP 36-1300 NP A/B forms a nearly colourless dry film, it is particularly suitable for coloured seals and O-rings where increased operational reliability and colour fastness are equally important.
The bonded coating offers excellent adhesion on materials like EPDM, TPE, NBR, HNBR, FPM and PA.

Water-based heat-setting single-component bonded coating free from co-solvent for visible elastomers
Klubertop TP 28-1311 is a black, single-component bonded coating for elastomers. It is a heat-setting lubricant and therefore particularly suitable for online application on sponge and conventional rubber profiles.
One of the main advantages of this product is its good adhesion on various elastomers.

Water-miscible PTFE dispersion
Kluberplus S 03-105 is a white, air-drying PTFE dispersion in an organic binding agent. Once applied and dried, the dispersion provides good wear resistance, has a low friction coefficient, and ensures smooth operation at low speeds. The dispersion dries very quickly in spite of the water contained in the solvent. Adhesion on iron, non-ferrous metals, plastic materials (e.g. ABS, PC, PVC, PU, PA, PS), and elastomers (e.g. NBR, FKM, SBR, EPDM) is good.