Klubertop TP 38-901

Manufacturer: KLÜBER LUBRICATION (Germany)

Klubertop TP 38-901 is a water-miscible, thermosetting for the food-processing, drinking water and pharmaceutical industries.
The dry film provided by Klubertop TP 38-901 fulfils the following requirements:

European and German regulations on food-grade products (FABES certificate CON 6222-2018).
Klubertop TP 38-901 is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Benefits for your application

Suitable for the food-processing, drinking water and pharmaceutical industries
- The product is NSF-H1 registered and meets the EU regulations pertaining to food grade products.
- Drinking water approval according to DVGW worksheet W 270 and ACS and WRAS certificate
- Complies with the requirements for organic coatings in drinking water applications
Hygienic and dry compared to oil/grease lubrication
- No contamination with oil or grease
- Sealing rings and other elements are prevented from sticking together during automatic feeding
- No VOC filter required since the product is based on water
Cost-saving and efficient compared to lubricant-free procedures
- Reduction of assembly forces by up to 40 % enables clean and easy assembly
- Shorter downtimes and increased production volumes possible due to low friction coefficients
- Easy handling of small mass-produced parts

Orther products

Product

Features, Application

Klubertop TP 31-1310 A/B

Water-miscible two-component structural bonded coating for highly stressed profiled seals in motor vehicles
Klubertop TP 37-1310 A/B P is an air-drying, water-miscible two-component bonded coatings with an excellent friction and wear behaviour.
Klubertop TP 37-1310 A/B P offers excellent adhesion on all kinds of elastomer types such as EPDM, TPE, FPM, PUR etc.

Klubertop TP 37-1310 A/B P

Water-miscible, two-component bonded coatings for automotive body seals
Klubertop TP 22, 27 and 31-1310 A/B are air-hardening, black two-component bonded coatings with varying solid matter content plus an organic, water-miscible binding agent. The products offer good adhesion to e.g. EPDM, TPE, FPM, PUR.

Klubertop TP 46-111

Water-miscible, thermo-setting PTFE-based bonded coating for low to medium loads
Klubertop TP 46-111 is a thermosetting, black bonded coating based on polytetrafluoroethylene (PTFE) and an organic, water-dilutable binder.
Klubertop TP 46-111 is a ready-to-use fluid containing water as a solvent.
Adhesion to metals and various plastics is good.

Klubertop TM 06-111

Thermosetting bonded coating for high loads and good corrosion protection
Once applied and hardened, the coating ensures:

good wear resistance
excellent corrosion protection
wide service temperature range
no stick-slip at low relative speeds
excellent wear protection on zinc-phosphated surfaces

Kluberplus S 03-105

Water-miscible PTFE dispersion
Kluberplus S 03-105 is a white, air-drying PTFE dispersion in an organic binding agent. Once applied and dried, the dispersion provides good wear resistance, has a low friction coefficient, and ensures smooth operation at low speeds. The dispersion dries very quickly in spite of the water contained in the solvent. Adhesion on iron, non-ferrous metals, plastic materials (e.g. ABS, PC, PVC, PU, PA, PS), and elastomers (e.g. NBR, FKM, SBR, EPDM) is good.

Klubertop TP 28-1311 N

Water-based heat-setting single-component bonded coating free from co-solvent for visible elastomers
Klubertop TP 28-1311 is a black, single-component bonded coating for elastomers. It is a heat-setting lubricant and therefore particularly suitable for online application on sponge and conventional rubber profiles.
One of the main advantages of this product is its good adhesion on various elastomers.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416