Klubertop TP 46-111

Manufacturer: KLÜBER LUBRICATION (Germany)
Water-miscible, thermo-setting PTFE-based bonded coating for low to medium loads
Klubertop TP 46-111 is a thermosetting, black bonded coating based on polytetrafluoroethylene (PTFE) and an organic, water-dilutable binder.
Klubertop TP 46-111 is a ready-to-use fluid containing water as a solvent.
Adhesion to metals and various plastics is good.
Benefits for your application
  • Clean and dry surface with lubricating effect
    • lifetime resistance to wear when subjected to low to medium loads, lubricant firmly incorporated
    • no contamination by fluid lubricant
    • no “sticking“ during automated assembly
  • Lower costs and less space needed for processing
    • Klubertop TP 46-111 is water-miscible, no VOC filter systems needed
    • cost-efficient mass coating and coating of small parts possible owing to the thermosetting system
  • Higher component performance
    • low friction coefficient
    • prevents stick-slip
    • delayed tribocorrosion
    • excellent corrosion protection on phosphated substrate
    • good chemical resistance

Orther products

Product
Features, Application
Klubertop TP 38-901 is a water-miscible, thermosetting for the food-processing, drinking water and pharmaceutical industries.
The dry film provided by Klubertop TP 38-901 fulfils the following requirements:
  • European and German regulations on food-grade products (FABES certificate CON 6222-2018).
  • Klubertop TP 38-901 is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
Water-based heat-setting single-component bonded coating free from co-solvent for visible elastomers
Klubertop TP 28-1311 is a black, single-component bonded coating for elastomers. It is a heat-setting lubricant and therefore particularly suitable for online application on sponge and conventional rubber profiles.
One of the main advantages of this product is its good adhesion on various elastomers.
Water-miscible PTFE dispersion
Kluberplus S 03-105 is a white, air-drying PTFE dispersion in an organic binding agent. Once applied and dried, the dispersion provides good wear resistance, has a low friction coefficient, and ensures smooth operation at low speeds. The dispersion dries very quickly in spite of the water contained in the solvent. Adhesion on iron, non-ferrous metals, plastic materials (e.g. ABS, PC, PVC, PU, PA, PS), and elastomers (e.g. NBR, FKM, SBR, EPDM) is good.
Two-component bonded coating for metal components
Klubertop TP 41 N A/B is a thermosetting, black-coloured high-performance bonded coating made up of two component parts. It has an organic binder containing PTFE-free solid lubricants.
This bonded coating reduces friction and wear on metal/metal and metal/plastic material pairings. It can be used for high mechano-dynamic loads as well as with high temperatures.
Klubertop TP 41 N A/B excels due to its excellent high wear resistance plus good adhesion on steel and aluminium substrates.
Two-component bonded coating for metal components
Klubertop TP 42 N A-B is a thermosetting, two-component, black-coloured bonded coating. It has an organic binder containing PTFE-free wear protection additives.
Klubertop TP 42 N A-B reduces friction and wear in metal/metal combinations. It has a particularly high level of wear resistance and a relatively high friction coefficient for a bonded coating.
Single-component, air-drying bonded coating for flocked seals
Klubertop TP 18-810 N is an air-drying, water-based bonded coating.
 
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16