Mineral oil-based special lubricants
STRUCTOVIS HD is a special lubricant series based on mineral oil and available in different viscosity grades.
All STRUCTOVIS HD types offer good wear and corrosion protection. The STRUCTOVIS types provided with an adhesion improver are extremely adhesive thus reducing considerably the risk of contamination due to oil leakage, especially at high chain speeds. The STRUCTOVIS types of higher viscosity (AHD to CHD) may also reduce noise of chains.
High-temperature cleaning and lubricating oil for chains
Klubertherm CH 2-140 has improved thermal stability and load carrying capacity, which enables it to provide good wear protection for bending rods/bolts, rollers and chains during normal production. At the same time, the cleaning additives in the oil dissolve/suspend the pasty residues and flush them away from the lubrication point, thus providing a good cleaning effect without disturbing the production schedule.
High-temperature chain oil for transport- and conveyor chains in the automotive industry
Klubersynth CHX 2-220 is a high-temperature oil especially developed with the know-how of a leading automotive paint manufacturer. Due to its compatibility with modern cathodic immersion paint systems it increases process reliability for the operator.
The new type of ester base oil offers better resistance to ageing, and any residues are dissolved by relubrication with fresh oil. Residue formation is low, which means less maintenance and repairs.
Synthetic oil for chains in can lacquering lines for the food-processing industry
Kluberfood NH1 C 6-150 is a special synthetic high-temperature oil on a PG base developed for the lubrication of chains operating through can and tin-plate curing, lacquering and decorating ovens.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.
High-temperature chain oil
HOTEMP PLUS is a synthetic high-temperature chain oil for textile and plastic processing machines ensuring reliable operation even at high temperature and stress.
It creeps very well and thus rapidly forms a lubricating film.
Its specific additive combination makes HOTEMP PLUS is highly resistant to pressure and wear. Special adhesion improvers prevent the oil being thrown off the lubrication point.
HOTEMP PLUS is very efficient against the settling of finishing and softening compounds and their condensates at the point of friction. The few residues created by synthetic constituents are easy to regenerate by adding fresh oil.
High-temperature oil for oil-lubricated stenter chains in the textile industry
Klubersynth CTH 2-260 is a special high-temperature chain oil for reliable lubrication at high operating temperatures and loads. It has low evaporation losses at high temperatures and does not form varnish build-up when used correctly - it is important to keep friction points covered with an oil film at all times. It also regenerates pasty used oil at the friction points to ensure sufficient lubrication. It also offers good creeping ability, ensuring quick lubricant film formation.
Synthetic high-temperature chain oil
HOTEMP SUPER CH 2-100 is a synthetic high-temperature chain oil based on a low-viscous, solvent-free and thermally stable ester oil.
The special additives contained in HOTEMP SUPER CH 2-100 ensure good wear protection and lubricity.
HOTEMP SUPER CH 2-100 has only low evaporation losses at high operating temperatures.
