Kluberfood NH1 CH 6-120 Supreme

Manufacturer: KLÜBER LUBRICATION (Germany)

High-temperature chain oil for the food-processing and pharmaceutical industries
Kluberfood NH1 CH 6-120 SUPREME is used to lubricate chains in industrial ovens operating at temperatures up to 650°C. The special carrier fluid conveys white solid lubricants to the friction point of the chain. The carrier fluid then evaporates without leaving organic residues. Therefore it helps to improve food safety in your plant. Kluberfood NH1 CH 6-120 SUPREME does not contain graphite, contamination with black particles is avoided.
Kluberfood NH1 CH 6-120 SUPREME is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570.
Kluberfood NH1 CH 6-120 SUPREME offers good wetting properties and excellent penetration with high dispersion stability.

Benefits for your application

Improved process reliability for food processing as the product contains H1-registered white solid lubricants instead of black graphite
Longer relubrication periods because of the impregnation effect of the white solid lubricant
Increased chain lifetime, due to excellent anti-wear behaviour, even at extreme temperatures
Modern synthetic oil offering good corrosion protection
ISO 21469 certified - supports compliance with the hygienic requirements in your production plant.

Orther products

Product

Features, Application

Kluberthermp CH 2-140

High-temperature cleaning and lubricating oil for chains
Klubertherm CH 2-140 has improved thermal stability and load carrying capacity, which enables it to provide good wear protection for bending rods/bolts, rollers and chains during normal production. At the same time, the cleaning additives in the oil dissolve/suspend the pasty residues and flush them away from the lubrication point, thus providing a good cleaning effect without disturbing the production schedule.

HOTEMP SUPER N PLUS

High-temperature oil for continuous wood panel presses
HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds.
HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP...series with further development in terms of evaporation losses at temperatures between 230°C and 260°C.

Klubersynth CHM 2-100

High-temperature oils for transmission, lifting and conveyor chains
The high-temperature oils of the Klubersynth CHM 2 series are manufactured on the basis of ester mixtures. These fully synthetic oils show good wear protection, low formation of residues (which are soluble in fresh oil) and high thermal stability. Their high lubricity increase operational reliability and extend the service life of machines.

Klubersynth CFH 2-400

Special high-temperature oil for sliding chain systems operating at very high speeds in biaxial film stretchers made by Brückner Maschinenbau
Klubersynth CFH 2-400 was especially developed for film stretchers involving chain speeds of more than 450 m/min and oven temperatures in excess of 200°C. Over 40 years of cooperation and partnership with film stretcher OEMs such as Brückner Maschinenbau and operators has helped us build sound technical expertise in the development of high-temperature chain oils.
Klubersynth CFH 2-400 considerably reduces the formation and adhesion of residues in the chain system. As a result, the friction points can be supplied with sufficient lubricant for many months or even years. Moreover, machine availability increases due to a lower need for cleaning.

Kluberfood NH1 CH 2-460

Regenerative high-temperature chain oil for conveyor and transport chains in the food-processing and pharmaceutical industries
Kluberfood NH1 CH 2-460 is a synthetic high-temperature oil that can dissolve residues as fresh oil enters the circuit. Continuous minimum-quantity lubrication with this oil leads to longer chain life. The product's optimised thermal stability helps reduce lubricant consumption.
As thermal residues are regenerated, Kluberfood NH1 CH 2-460 can lead to lower maintenance and repair costs.
It is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570.

Hotemp +Plus+

High-temperature chain oil
HOTEMP PLUS is a synthetic high-temperature chain oil for textile and plastic processing machines ensuring reliable operation even at high temperature and stress.
It creeps very well and thus rapidly forms a lubricating film.
Its specific additive combination makes HOTEMP PLUS is highly resistant to pressure and wear. Special adhesion improvers prevent the oil being thrown off the lubrication point.
HOTEMP PLUS is very efficient against the settling of finishing and softening compounds and their condensates at the point of friction. The few residues created by synthetic constituents are easy to regenerate by adding fresh oil.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416