Hotemp +Plus+

Manufacturer: KLÜBER LUBRICATION (Germany)

High-temperature chain oil
HOTEMP PLUS is a synthetic high-temperature chain oil for textile and plastic processing machines ensuring reliable operation even at high temperature and stress.
It creeps very well and thus rapidly forms a lubricating film.
Its specific additive combination makes HOTEMP PLUS is highly resistant to pressure and wear. Special adhesion improvers prevent the oil being thrown off the lubrication point.
HOTEMP PLUS is very efficient against the settling of finishing and softening compounds and their condensates at the point of friction. The few residues created by synthetic constituents are easy to regenerate by adding fresh oil.

Benefits for your application

Efficient lubrication even at high operating temperatures
Good regeneration effect on used oil
Favourable viscosity-temperature properties for safe cold starts
Outstanding penetration properties for rapid formation of the lubricating film
Good adhesion, no throwing off
Resistance to wear and pressure
Little residue owing to fully synthetic constituents
Efficient against the settling of finishing and softening compounds and their condensates at the point of friction

Orther products

Product

Features, Application

HOTEMP SUPER N PLUS

High-temperature oil for continuous wood panel presses
HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds.
HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP...series with further development in terms of evaporation losses at temperatures between 230°C and 260°C.

Klubersynth CTH 2-260

High-temperature oil for oil-lubricated stenter chains in the textile industry
Klubersynth CTH 2-260 is a special high-temperature chain oil for reliable lubrication at high operating temperatures and loads. It has low evaporation losses at high temperatures and does not form varnish build-up when used correctly - it is important to keep friction points covered with an oil film at all times. It also regenerates pasty used oil at the friction points to ensure sufficient lubrication. It also offers good creeping ability, ensuring quick lubricant film formation.

Klubersynth CHX 2-220

High-temperature chain oil for transport- and conveyor chains in the automotive industry
Klubersynth CHX 2-220 is a high-temperature oil especially developed with the know-how of a leading automotive paint manufacturer. Due to its compatibility with modern cathodic immersion paint systems it increases process reliability for the operator.
The new type of ester base oil offers better resistance to ageing, and any residues are dissolved by relubrication with fresh oil. Residue formation is low, which means less maintenance and repairs.

Kluberfood NH1 C 6-150

Synthetic oil for chains in can lacquering lines for the food-processing industry
Kluberfood NH1 C 6-150 is a special synthetic high-temperature oil on a PG base developed for the lubrication of chains operating through can and tin-plate curing, lacquering and decorating ovens.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.

Klubersynth CHM 2-100

High-temperature oils for transmission, lifting and conveyor chains
The high-temperature oils of the Klubersynth CHM 2 series are manufactured on the basis of ester mixtures. These fully synthetic oils show good wear protection, low formation of residues (which are soluble in fresh oil) and high thermal stability. Their high lubricity increase operational reliability and extend the service life of machines.

Kluberfood NH1 CH 2-460

Regenerative high-temperature chain oil for conveyor and transport chains in the food-processing and pharmaceutical industries
Kluberfood NH1 CH 2-460 is a synthetic high-temperature oil that can dissolve residues as fresh oil enters the circuit. Continuous minimum-quantity lubrication with this oil leads to longer chain life. The product's optimised thermal stability helps reduce lubricant consumption.
As thermal residues are regenerated, Kluberfood NH1 CH 2-460 can lead to lower maintenance and repair costs.
It is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416