Klubersynth CHX 2-220

Manufacturer: KLÜBER LUBRICATION (Germany)

High-temperature chain oil for transport- and conveyor chains in the automotive industry
Klubersynth CHX 2-220 is a high-temperature oil especially developed with the know-how of a leading automotive paint manufacturer. Due to its compatibility with modern cathodic immersion paint systems it increases process reliability for the operator.
The new type of ester base oil offers better resistance to ageing, and any residues are dissolved by relubrication with fresh oil. Residue formation is low, which means less maintenance and repairs.

Benefits for your application

Improved process reliability due to tested compatibility with modern cathodic immersion paint systems
Lower lubricant consumption due to very good resistance to oxidation and ageing
Low residue formation, soluble in fresh oil, reducing maintenance and repair costs
Long chain life due to very good wear protection, reducing investment and repair costs

Orther products

Product

Features, Application

Kluberfluid C-PG 17 Ultra

Operational open gear lubricant for large girth gear drives
Kluberfluid C-PG 17 Ultra is based on an innovative synthetic base oil and was developed to meet your increasing demands of modern day open gears.
The high viscosity index of Kluberfluid C-PG 17 Ultra provides the highest film thicknesses and thus the highest load carrying capacity, even if your gears are running at elevated temperatures.

Kluberoil 4 UH1-32...1500 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries
Kluberoil 4 UH1 N is a synthetic high-performance gear and multipurpose oil based on PAO satisfying the growing requirements and increasing power density of modern gears.
These are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Kluberfluid C-F 8 Ultra

Operational lubricant for large girth gear drives
Kluberfluid C-F 8 ULTRA is a newly developed lubricant especially for use on medium-size to large girth gear drives. It is based on a mixture of synthetic hydrocarbons and mineral oil.
Kluberfluid C-F 8 ULTRA provides extremely good adhesion, resistance to high pressure and exceptional wear protection. It is suitable for use at component temperatures up to 120°C.

Hotemp 2000

High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250 °C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.

Hotemp Super N Plus

High-temperature oil for continuous wood panel presses
HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds.
HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP... series with further development in terms of evaporation losses at temperatures between 230 and 260 °C.

Klubersynth UH1 6-320

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology
Klubersynth UH1 6 is a synthetic high-performance gear oil based on PG satisfying the growing requirements and increasing power density of modern gears. It includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
It is approved by Flender, SEW, etc.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416