Kluberthermp CH 2-140

Semi-synthetic oil for chains in high humid process areas for the food-processing industry
Kluberfood NH1 C 8-80 is a semi-synthetic chain oil developed for the lubrication of chains operating in high humidity for conveyor and drive chains. Its formulation, incorporating a special additive package, enables significant friction reduction and good protection against wear and fretting corrosion particularly in the highly stressed pin / bush areas.
Kluberfood NH1 C 8-80 has good chemical stability for acidic process environments like in pasta dryer applications (lactic acid) where other oils may contribute to residue build-up.
Kluberfood NH1 C 8-80 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.

Ultimately biodegradable escalator chain oil
Klüberbio C 2-46 is an ultimately biodegradable ester oil falling under the water hazard class 1.
It is free of solvents and offers good penetrating properties as well as wear protection.

High-temperature oils for transmission, lifting and conveyor chains
The high-temperature oils of the Klubersynth CHM 2 series are manufactured on the basis of ester mixtures. These fully synthetic oils show good wear protection, low formation of residues (which are soluble in fresh oil) and high thermal stability. Their high lubricity increase operational reliability and extend the service life of machines.

Synthetic oil for chains in can lacquering lines for the food-processing industry
Kluberfood NH1 C 6-150 is a special synthetic high-temperature oil on a PG base developed for the lubrication of chains operating through can and tin-plate curing, lacquering and decorating ovens.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.

Mineral oil-based special lubricants
STRUCTOVIS HD is a special lubricant series based on mineral oil and available in different viscosity grades.
All STRUCTOVIS HD types offer good wear and corrosion protection. The STRUCTOVIS types provided with an adhesion improver are extremely adhesive thus reducing considerably the risk of contamination due to oil leakage, especially at high chain speeds. The STRUCTOVIS types of higher viscosity (AHD to CHD) may also reduce noise of chains.

High-temperature chain oil for the food-processing and pharmaceutical industries
Kluberfood NH1 CH 6-120 SUPREME is used to lubricate chains in industrial ovens operating at temperatures up to 650°C. The special carrier fluid conveys white solid lubricants to the friction point of the chain. The carrier fluid then evaporates without leaving organic residues. Therefore it helps to improve food safety in your plant. Kluberfood NH1 CH 6-120 SUPREME does not contain graphite, contamination with black particles is avoided.
Kluberfood NH1 CH 6-120 SUPREME is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570.
Kluberfood NH1 CH 6-120 SUPREME offers good wetting properties and excellent penetration with high dispersion stability.