Kluberfood NH1 CH 2-460

High-temperature oils for transmission, lifting and conveyor chains
The high-temperature oils of the Klubersynth CHM 2 series are manufactured on the basis of ester mixtures. These fully synthetic oils show good wear protection, low formation of residues (which are soluble in fresh oil) and high thermal stability. Their high lubricity increase operational reliability and extend the service life of machines.

High-temperature chain oil for the food-processing and pharmaceutical industries
Kluberfood NH1 CH 6-120 SUPREME is used to lubricate chains in industrial ovens operating at temperatures up to 650°C. The special carrier fluid conveys white solid lubricants to the friction point of the chain. The carrier fluid then evaporates without leaving organic residues. Therefore it helps to improve food safety in your plant. Kluberfood NH1 CH 6-120 SUPREME does not contain graphite, contamination with black particles is avoided.
Kluberfood NH1 CH 6-120 SUPREME is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570.
Kluberfood NH1 CH 6-120 SUPREME offers good wetting properties and excellent penetration with high dispersion stability.

High-temperature oil for oil-lubricated stenters in the textile industry
Klubersynth HT 2-220 CN is a specialty synthetic chain oil for the high temperature applications, which can provide reliable lubrication and protection under high temperatures and high loads. This oil has very good adhesion and spreading property, which can quickly and effectively form the lubricating film in the lubrication points.  Klubersynth HT 2-220 CN has very good anti wearing performance and load capacity.

Synthetic oil for chains in can lacquering lines for the food-processing industry
Kluberfood NH1 C 6-150 is a special synthetic high-temperature oil on a PG base developed for the lubrication of chains operating through can and tin-plate curing, lacquering and decorating ovens.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.

High-temperature oil for oil-lubricated stenter chains in the textile industry
Klubersynth CTH 2-260 is a special high-temperature chain oil for reliable lubrication at high operating temperatures and loads. It has low evaporation losses at high temperatures and does not form varnish build-up when used correctly - it is important to keep friction points covered with an oil film at all times. It also regenerates pasty used oil at the friction points to ensure sufficient lubrication. It also offers good creeping ability, ensuring quick lubricant film formation.

High-temperature chain oil
HOTEMP PLUS is a synthetic high-temperature chain oil for textile and plastic processing machines ensuring reliable operation even at high temperature and stress.
It creeps very well and thus rapidly forms a lubricating film.
Its specific additive combination makes HOTEMP PLUS is highly resistant to pressure and wear. Special adhesion improvers prevent the oil being thrown off the lubrication point.
HOTEMP PLUS is very efficient against the settling of finishing and softening compounds and their condensates at the point of friction. The few residues created by synthetic constituents are easy to regenerate by adding fresh oil.