Ultimately biodegradable escalator chain oil
Klüberbio C 2-46 is an ultimately biodegradable ester oil falling under the water hazard class 1.
It is free of solvents and offers good penetrating properties as well as wear protection.
High-temperature chain oil
HOTEMP PLUS is a synthetic high-temperature chain oil for textile and plastic processing machines ensuring reliable operation even at high temperature and stress.
It creeps very well and thus rapidly forms a lubricating film.
Its specific additive combination makes HOTEMP PLUS is highly resistant to pressure and wear. Special adhesion improvers prevent the oil being thrown off the lubrication point.
HOTEMP PLUS is very efficient against the settling of finishing and softening compounds and their condensates at the point of friction. The few residues created by synthetic constituents are easy to regenerate by adding fresh oil.
High-temperature chain oils for the food-processing industry
The Kluberfood NH1 CH 2 Plus oil series comprises synthetic high-temperature chain oils incorporating special base oils ensuring reliable lubrication at high temperatures. They show low evaporation losses and high oxidation stability for optimised relubrication intervals and reduced oil quantities.
The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
High-temperature oils for transmission, lifting and conveyor chains
The high-temperature oils of the Klubersynth CHM 2 series are manufactured on the basis of ester mixtures. These fully synthetic oils show good wear protection, low formation of residues (which are soluble in fresh oil) and high thermal stability. Their high lubricity increase operational reliability and extend the service life of machines.
Special high-temperature oil for sliding chain systems operating at very high speeds in biaxial film stretchers made by Brückner Maschinenbau
Klubersynth CFH 2-400 was especially developed for film stretchers involving chain speeds of more than 450 m/min and oven temperatures in excess of 200°C. Over 40 years of cooperation and partnership with film stretcher OEMs such as Brückner Maschinenbau and operators has helped us build sound technical expertise in the development of high-temperature chain oils.
Klubersynth CFH 2-400 considerably reduces the formation and adhesion of residues in the chain system. As a result, the friction points can be supplied with sufficient lubricant for many months or even years. Moreover, machine availability increases due to a lower need for cleaning.
High-temperature cleaning and lubricating oil for chains
Klubertherm CH 2-140 has improved thermal stability and load carrying capacity, which enables it to provide good wear protection for bending rods/bolts, rollers and chains during normal production. At the same time, the cleaning additives in the oil dissolve/suspend the pasty residues and flush them away from the lubrication point, thus providing a good cleaning effect without disturbing the production schedule.
Synthetic oil for chains in can lacquering lines for the food-processing industry
Kluberfood NH1 C 6-150 is a special synthetic high-temperature oil on a PG base developed for the lubrication of chains operating through can and tin-plate curing, lacquering and decorating ovens.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.
