Kluberlub BVH 71-461

Manufacturer: KLÜBER LUBRICATION (Germany)

High-temperature lubricating grease for bearings and valves
Kluberlub BVH 71-461 is a special lubricating grease based on mineral oil/synthetic hydrocarbon oil/polyurea. It has a wide service temperature range and is suitable for rolling bearings up to a service temperature of 160°C.
Kluberlub BVH 71-461 ensures excellent wear protection, and its EP additives provide a high pressure absorption capacity.
It is very adhesive and resistant to water under static and dynamic loads.
Kluberlub BVH 71-461 is also particularly resistant to oxidation and ageing and reliably protects against corrosion. It has an especially high sealing effect in coke oven valves.

Benefits for your application

Lubricating grease for extreme requirements
Efficient at increased temperatures, vibrations and shock loads
Resistant to ageing and oxidation
Good protection against wear
Good anticorrosion properties
High pressure absorption capacity
Resistant to aggressive media
Good sealing effect
Has proven effective in coke oven gas valves

Orther products

Product

Features, Application

Staburags NBU 30

Lubricating grease with high resistance to ambient media
The industry imposes increasingly diverse and stringent requirements on lubricating greases. Many applications require greases offering good wear protection, high mechano-dynamical stability and water resistance.
For such requirements we developed STABURAGS NBU 30, a lubricating grease based on mineral oil and a barium complex soap.
STABURAGS NBU 30 offers good wear and corrosion protection as well as resistance to water and many diluted alkaline and acidic solutions, thus extending relubrication intervals and reducing operating costs.

Staburags NBU 8 EP

Rolling bearing and high-pressure grease
STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water.

Klubersynth OA 98-15000

Operational lubricant for large gear drives
Klubersynth OA 98-15000 is based on the SLIBF concept (Solid Lubricant Integrated Base Fluid) was developed precisely to meet the high demands of open gear drives.
It provides excellent adhesion, good film formation, less splashing from the gears and reducing leakages from the gear casing. This results in better maintenance practices and increased safety. It also provides good pumpability at lower temperatures and offers low resistance to pumping the lubricant.

Kluber Summit SB 46, 68

Synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Kluber Summit SB oils are air compressor oils based on synthetic hydrocarbons and additives. These oils are miscible with mineral oils and synthetic hydrocarbon oils, but not with oils based on polyglycol.
Kluber Summit SB oils offer excellent oxidation and ageing stability and show a good viscosity-temperature behaviour.

Kluber Summit SH 32…68

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Kluber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.

Kluberpaste HEL 46-450

High-temperature screw paste
Kluberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.
Kluberpaste HEL 46-450 is suitable for a temperature range between -40°C and 1000°C. In the normal temperature range (i.e. below 200°C) it shows good anticorrosion behaviour and good water resistance. Above 200°C it acts as a dry lubricant.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416