AT-306

Manufacturer: HABASIT (Switzerland)
The AT-306 is a preparing device for skiving of Habasit belts up to a width of 300 mm and a thickness of 8 mm.
The AT-306 is especially suitable for preparation of Thermofix joints of power transmission belts in the fabrication workshop in large series.

Orther products

Product
Features, Application
SM-1203

SM-1203

Mã SP:
The SM-1203 is a cutting machine to longitudinally cut Habasit belts and tapes up to a width of 1,410 mm and a thickness of 10 mm (depending on material).
PM-459

PM-459

Mã SP:
Equipped with 160 platens, Model PM-459 features 450 mm max belt width. Units include insulation to avoid excessive heating of press body, and plastic sliding pad on bottom of press to prevent damage to conveyors during installation and to optimize stability during joining.
PT-300

PT-300

Mã SP:
The PT-300 is a hot-pressing device designed for joining Habasit driving and conveyor belts up to 300 mm wide and 8 mm thick using the Thermofix procedure. The hot-pressing device PT-300 is suitable for both workshop and portable use.
AT-60

AT-60

Mã SP:
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance.
PF-101

PF-101

Mã SP:
The PF-101 is a hot-pressing device for joining of Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm. Maximum finger length is 80 mm. It is designed mainly for Flexproof but Thermofix is also possible.
AF-30/0

AF-30/0

Mã SP:
The AF-30 is a device for preparing (die-cutting) of Habasit belts and tapes up to a width of 30 mm and a thickness of 3 mm for Flexproof (finger) joints. It is suitable for the standard Habasit finger geometries with a pitch of 6 or 8 x 30 mm (different cutting heads).
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16