The SM-1203 is a cutting machine to longitudinally cut Habasit belts and tapes up to a width of 1,410 mm and a thickness of 10 mm (depending on material).
Hot-pressing device for Thermofix joining of belts up to 50 mm wide and 2 mm thick. It is especially suitable for offline joining of spindle tapes and machine tapes
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance.
The PF-62 is a hot pressing device for joining of Habasit power transmission belts made of thermoplastics up to a width of 60 mm and a thickness of 3,6 mm with the Flexproof method.
The AF-100/US is a device for preparing (die-cutting) Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm for Flexproof (finger) joints.
The PM-3204 are a range of hot-pressing devices for joining of Habasit belts. They are capable of Thermofix (skived) Flexproof (finger) and Step-Flex (finger over finger) joining of all Habasit belts which can be joined in the standard temperature range
The AT-306 is a preparing device for skiving of Habasit belts up to a width of 300 mm and a thickness of 8 mm.
The AT-306 is especially suitable for preparation of Thermofix joints of power transmission belts in the fabrication workshop in large series.
