The AF-30 is a device for preparing (die-cutting) of Habasit belts and tapes up to a width of 30 mm and a thickness of 3 mm for Flexproof (finger) joints. It is suitable for the standard Habasit finger geometries with a pitch of 6 or 8 x 30 mm (different cutting heads).
The PT-300 is a hot-pressing device designed for joining Habasit driving and conveyor belts up to 300 mm wide and 8 mm thick using the Thermofix procedure. The hot-pressing device PT-300 is suitable for both workshop and portable use.
The AFZ-1200 is used for efficient die-cutting of Habasit belts and tapes up to a width of 1,250 mm and a thickness of 8 mm for the Flexproof or Step-Flex (only two-ply belts) joining methods. It is suitable for all standard Habasit finger geometries with a pitch of 10 mm or 20 mm
The PM-3604 is a hot pressing device for Thermofix, Flexproof, and Step-Flex joining of Habasit belts and tapes up to a width of 3,600 mm and a thickness of 10 mm.
The PM-1604 is a hot pressing device for Thermofix, Flexproof, and Step-Flex joining of Habasit belts and tapes up to a width of 1,600 mm and a thickness of 10 mm.
The PF-62 is a hot pressing device for joining of Habasit power transmission belts made of thermoplastics up to a width of 60 mm and a thickness of 3,6 mm with the Flexproof method.
_cr_420x444.jpg)
