Centoplex CX 4/375 AU

Manufacturer: KLÜBER LUBRICATION (Germany)
High-speed grease for gears
CENTOPLEX CX 4/375 AU is a special lubricating grease based on mineral oil and lithium soap. It is a very soft grease of consistency grade 0.
Benefits for your application
  • For small gears subject to high peripheral speeds
  • Shear stable
  • Good oil separation at low temperatures

Orther products

Product
Features, Application
Dynamically light, long-term lubricating grease
ISOFLEX LDS 18 SPECIAL A is a dynamically light long-term grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. The product is resistant to ageing, oxidation and water, and it protects reliably against corrosion.
Asonic GLY 32

Asonic GLY 32

Mã SP:
Low-temperature lubricating grease for high-speed, low-noise rolling bearings
ASONIC GLY 32 is a synthetic low-noise lubricating grease manu­factured in a clean environment.
The product components used and the grease’s low base-oil viscosity yield a very high speed factor and a low frictional torque, as can be seen from the results of measurements made on the low-temperature test rig.
High-purity rolling bearing grease for long-term lubrication
Kluberquiet BQH 72-102 is a synthetic high-temperature lubricating grease. Due to the careful selection of product components and the clean manufacturing environment, Kluberquiet It is a rolling bearing grease with a particularly low noise level. It offers excellent performance characteristics thanks to a high-quality ester oil, a new polyurea thickener and special additives. It is special in that it combines high-temperature resistance and extreme purity.
Low-noise rolling bearing grease for the long-term lubrication of high-speed rolling bearings
Kluberquiet BQ 74-73 N is a rolling bearing grease based on synthetic hydrocarbon, ester oil and urea. It was especially developed for the lubrication of high-speed ball bearings operating at high temperatures.
Lubricating grease for high temperatures and speeds
Kluberalfa lubricants based on perfluorinated polyether (PFPE) have been developed for specific applications where optimum performance under lifetime lubrication conditions is required.
Kluberalfa BF 83-102 has been designed to ensure long service life of rolling bearings subject to high speeds and very high permanent temperatures. Kluberalfa BF 83-102 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.
High-speed spindle bearing grease
Kluberspeed BFP 42-32 is a high-speed spindle bearing grease with a synthetic base oil and a special lithium thickener. Due to its base oil viscosity and the chemical composition Kluberspeed BFP 42-32 can be used for high-speed spindle bearings where it achieves a longer service life than conventional spindle bearing greases.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16