Kluberalfa BF 83-102

Manufacturer: KLÜBER LUBRICATION (Germany)

Lubricating grease for high temperatures and speeds
Kluberalfa lubricants based on perfluorinated polyether (PFPE) have been developed for specific applications where optimum performance under lifetime lubrication conditions is required.
Kluberalfa BF 83-102 has been designed to ensure long service life of rolling bearings subject to high speeds and very high permanent temperatures. Kluberalfa BF 83-102 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.

Benefits for your application

Allows new applications in high-speed bearings lubricated with grease
- due to better thermal stability than conventional high-speed greases
- due to better speed characteristics than conventional PFPE/PTFE high-temperature greases
- due to NSF-H1 registration

Orther products

Product

Features, Application

Centoplex CX 4/375 AU

High-speed grease for gears
CENTOPLEX CX 4/375 AU is a special lubricating grease based on mineral oil and lithium soap. It is a very soft grease of consistency grade 0.

Kluberfood NH1 M 4 - 100

Fully synthetic high-performance oils for high-speed can closing machines
The Kluberfood NH1 M 4-100, -150, -220 oils are mineral oil-free products based on synthetic hydrocarbons.
Klüberfood NH1 M 4-100, -150, -220 oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. In addition to their good anti-corrosion properties, Klüberfood NH1 M 4-series has a very good oil and water absorption behaviour.

Kluberplex BEM 41-132

High-temperature and long-term grease for rolling bearings
Kluberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.

Klubersynth CFH 2-400

Special high-temperature oil for sliding chain systems operating at very high speeds in biaxial film stretchers made by Brückner Maschinenbau
Klubersynth CFH 2-400 was especially developed for film stretchers involving chain speeds of more than 450 m/min and oven temperatures in excess of 200°C. Over 40 years of cooperation and partnership with film stretcher OEMs such as Brückner Maschinenbau and operators has helped us build sound technical expertise in the development of high-temperature chain oils.

Kluberquiet BQ 74-73 N

Low-noise rolling bearing grease for the long-term lubrication of high-speed rolling bearings
Kluberquiet BQ 74-73 N is a rolling bearing grease based on synthetic hydrocarbon, ester oil and urea. It was especially developed for the lubrication of high-speed ball bearings operating at high temperatures.

Isoflex Topas NCA 52

Synthetic long-term grease for rolling and plain bearings, linear motion guides
ISOFLEX TOPAS NCA 52 is a synthetic long-term grease with good low-temperature properties. It has a good load-carrying capacity and ensures smooth running even at high speeds and accelerations.
The thickener made of special calcium soap ensures good adhesion to the component and good resistance to media. The additives contained in ISOFLEX TOPAS NCA 52 increase wear protection.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416