High-speed spindle bearing grease
Kluberspeed BFP 42-32 is a high-speed spindle bearing grease with a synthetic base oil and a special lithium thickener. Due to its base oil viscosity and the chemical composition Kluberspeed BFP 42-32 can be used for high-speed spindle bearings where it achieves a longer service life than conventional spindle bearing greases.
Benefits for your application
Can be used for angular contact ball bearings and high-speed cylinder roller bearings, especially with steel/ceramic friction pairings
For horizontal, vertical and inclined mounting positions and very high speeds
Synthetic impregnating oils for sintered metal plain bearings
CONSTANT OY K fully synthetic oils offer a solution matching the needs of sintered metal plain bearings requiring long-term lubrication under arduous conditions.
CONSTANT OY K oils have been designed for both low and high-temperature applications.
Low-noise rolling bearing grease for long-term lubrication
Kluberquiet BQ 72-72 is made up of an ester oil, a polyurea thickener and special additives. These components have been combined such that Kluberquiet BQ 72-72 offers many advantages for the lubrication of rolling bearings
Synthetic long-term grease for rolling and plain bearings, linear motion guides
ISOFLEX TOPAS NCA 52 is a synthetic long-term grease with good low-temperature properties. It has a good load-carrying capacity and ensures smooth running even at high speeds and accelerations.
The thickener made of special calcium soap ensures good adhesion to the component and good resistance to media. The additives contained in ISOFLEX TOPAS NCA 52 increase wear protection.
Spindle bearing grease
ISOFLEX NBU 15 is a high-speed grease with a good pressure absorption capacity.
It consists of a combination of ester oil, synthetic hydrocarbon oil and mineral oil and a barium complex soap. It offers good protection against wear and corrosion and is resistant to water, media and oxidation.
Low-temperature lubricating grease for high-speed, low-noise rolling bearings
ASONIC GLY 32 is a synthetic low-noise lubricating grease manufactured in a clean environment.
The product components used and the grease’s low base-oil viscosity yield a very high speed factor and a low frictional torque, as can be seen from the results of measurements made on the low-temperature test rig.
High-speed grease for gears
CENTOPLEX CX 4/375 AU is a special lubricating grease based on mineral oil and lithium soap. It is a very soft grease of consistency grade 0.
