Kluberspeed BF 72-22

Manufacturer: KLÜBER LUBRICATION (Germany)

High-speed lubricating grease
Kluberspeed BF 72-22 is a high-performance special grease with a synthetic base oil and a polyurea thickener. The base oil viscosity and its viscosity-temperature characteristics allow Kluberspeed BF 72-22 to be used for a wide range of speeds and temperatures. Tests have shown that Kluberspeed BF 72-22 is suitable for extremely high speeds; speed factors of up to 2 million were attained. Kluberspeed BF 72‑22 also allows shorter running-in times and has a long service life.

Benefits for your application

Very good resistance to water and anticorrosive effect protect bearings against premature failure, thus helping to minimize maintenance costs.
Low starting torque enables problem-free operation and energy savings also at low temperatures
Long-term successful use in particular at high speeds
Shorter running-in of spindle bearings

Orther products

Product

Features, Application

Isoflex LDS 18 Special A

Dynamically light, long-term lubricating grease
ISOFLEX LDS 18 SPECIAL A is a dynamically light long-term grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. The product is resistant to ageing, oxidation and water, and it protects reliably against corrosion.

Klubersynth CFH 2-400

Special high-temperature oil for sliding chain systems operating at very high speeds in biaxial film stretchers made by Brückner Maschinenbau
Klubersynth CFH 2-400 was especially developed for film stretchers involving chain speeds of more than 450 m/min and oven temperatures in excess of 200°C. Over 40 years of cooperation and partnership with film stretcher OEMs such as Brückner Maschinenbau and operators has helped us build sound technical expertise in the development of high-temperature chain oils.

Kluberalfa BF 83-102

Lubricating grease for high temperatures and speeds
Kluberalfa lubricants based on perfluorinated polyether (PFPE) have been developed for specific applications where optimum performance under lifetime lubrication conditions is required.
Kluberalfa BF 83-102 has been designed to ensure long service life of rolling bearings subject to high speeds and very high permanent temperatures. Kluberalfa BF 83-102 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.

Kluberplex BEM 41-132

High-temperature and long-term grease for rolling bearings
Kluberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.

Kluberquiet BQ 74-73 N

Low-noise rolling bearing grease for the long-term lubrication of high-speed rolling bearings
Kluberquiet BQ 74-73 N is a rolling bearing grease based on synthetic hydrocarbon, ester oil and urea. It was especially developed for the lubrication of high-speed ball bearings operating at high temperatures.

Asonic GLY 32

Low-temperature lubricating grease for high-speed, low-noise rolling bearings
ASONIC GLY 32 is a synthetic low-noise lubricating grease manufactured in a clean environment.
The product components used and the grease’s low base-oil viscosity yield a very high speed factor and a low frictional torque, as can be seen from the results of measurements made on the low-temperature test rig.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416