Kluberfood NH1 M 4 - 100

Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Kluber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.
The oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.
They are NSF H1 registered.

Spindle bearing grease
ISOFLEX NBU 15 is a high-speed grease with a good pressure absorption capacity.
It consists of a combination of ester oil, synthetic hydrocarbon oil and mineral oil and a barium complex soap. It offers good protection against wear and corrosion and is resistant to water, media and oxidation.

Special low-temperature greases
ISOFLEX TOPAS L 32 and L 32 N have been designed for extremely low temperatures. These greases consist of a synthetic hydrocarbon oil and a special lithium soap. ISOFLEX TOPAS L 32 and L 32 N are resistant to ageing and oxidation and provide good corrosion protection as well as water resistance.
ISOFLEX TOPAS L 32 N also contains a UV indicator, which ensures quality checking even with minimum quantity lubrication.

Low-noise rolling bearing grease for long-term lubrication
Kluberquiet BQ 72-72 is made up of an ester oil, a polyurea thickener and special additives. These components have been combined such that Kluberquiet BQ 72-72 offers many advantages for the lubrication of rolling bearings

Low-temperature lubricating grease for high-speed, low-noise rolling bearings
ASONIC GLY 32 is a synthetic low-noise lubricating grease manu­factured in a clean environment.
The product components used and the grease’s low base-oil viscosity yield a very high speed factor and a low frictional torque, as can be seen from the results of measurements made on the low-temperature test rig.

High-speed spindle bearing grease
Kluberspeed BFP 42-32 is a high-speed spindle bearing grease with a synthetic base oil and a special lithium thickener. Due to its base oil viscosity and the chemical composition Kluberspeed BFP 42-32 can be used for high-speed spindle bearings where it achieves a longer service life than conventional spindle bearing greases.