Klubersynth CHX 2-220

High-temperature oil for oil-lubricated stenter chains in the textile industry
Klubersynth CTH 2-260 is a special high-temperature chain oil for reliable lubrication at high operating temperatures and loads. It has low evaporation losses at high temperatures and does not form varnish build-up when used correctly - it is important to keep friction points covered with an oil film at all times. It also regenerates pasty used oil at the friction points to ensure sufficient lubrication. It also offers good creeping ability, ensuring quick lubricant film formation.

Mineral oil-based special lubricants
STRUCTOVIS HD is a special lubricant series based on mineral oil and available in different viscosity grades.
All STRUCTOVIS HD types offer good wear and corrosion protection. The STRUCTOVIS types provided with an adhesion improver are extremely adhesive thus reducing considerably the risk of contamination due to oil leakage, especially at high chain speeds. The STRUCTOVIS types of higher viscosity (AHD to CHD) may also reduce noise of chains.

High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250 °C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Kluber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.

Needle and sinker oils for hosiery and flat-bed knitting machinery
Kluber Madol 100 oils based on special mineral base oils and additives.
They ensure reliable wetting of the friction points in your knitting machine, keep needle grooves clean and extend the needle life.
The oils' good oxidation stability contribute to reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time keeping maintenance costs to a minimum.