Klubersynth HT 2-220 CN

Manufacturer: KLÜBER LUBRICATION (Germany)

High-temperature oil for oil-lubricated stenters in the textile industry
Klubersynth HT 2-220 CN is a specialty synthetic chain oil for the high temperature applications, which can provide reliable lubrication and protection under high temperatures and high loads. This oil has very good adhesion and spreading property, which can quickly and effectively form the lubricating film in the lubrication points. Klubersynth HT 2-220 CN has very good anti wearing performance and load capacity.

Benefits for your application

The extended service lifetime of chains due to the improved anti wearing protection.
Good viscosity-temperature characteristic ensures the machine can start at low temperature.
Good adhesion and spreading properties for quickly forming the effective lubricating film.
Very low residues formed based on the fully synthetic recipe.
Good protection to all lubrication points by effective resistance to the sedimentation, lacquer-like residues, and condensation formed there.

Orther products

Product

Features, Application

Kluber Silvertex R 14

Cleaning oil for needles and sinkers in knitting machines
Kluber Silvertex R 14 is a cleaning oil based on paraffinic hydrocarbons.
Kluber Silvertex R 14 contains special additives providing a load-bearing lubricating film which ensures adequate lubrication also during the cleaning process.

Klubersynth GEM 4-32….680 N

Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Klubersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on PAO. Klubersynth GEM 4 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GEM 4 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.

Isoflex LDS 18 Special A

Dynamically light, long-term lubricating grease
ISOFLEX LDS 18 SPECIAL A is a dynamically light long-term grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. The product is resistant to ageing, oxidation and water, and it protects reliably against corrosion.

Kluber Summit SH 32, 46, 68

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Kluber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.

Klubersynth CTH 2-260

High-temperature oil for oil-lubricated stenter chains in the textile industry
Klubersynth CTH 2-260 is a special high-temperature chain oil for reliable lubrication at high operating temperatures and loads. It has low evaporation losses at high temperatures and does not form varnish build-up when used correctly - it is important to keep friction points covered with an oil film at all times. It also regenerates pasty used oil at the friction points to ensure sufficient lubrication. It also offers good creeping ability, ensuring quick lubricant film formation.

Kluber Summit SB 46, 68

Synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Kluber Summit SB oils are air compressor oils based on synthetic hydrocarbons and additives. These oils are miscible with mineral oils and synthetic hydrocarbon oils, but not with oils based on polyglycol.
Kluber Summit SB oils offer excellent oxidation and ageing stability and show a good viscosity-temperature behaviour.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416