Kluber Silvertex T 46

Manufacturer: KLÜBER LUBRICATION (Germany)

Semi-synthetic, biodegradable, high-performance needle and sinker oils
In the knitting industry, compatibility of materials, wear protection and scourability are becoming more and more stringent. Kluber Silvertex T needle oils are based on special mineral and synthetic base oils and additives. These oils are biodegradable according to OECD - 301 c. They reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time reducing operating costs.

Benefits for your application

Comply with the legal requirements set forth in EU Directive 2003/53/EC for placing NP/NPE-containing products on the market
Long service life of stitch-forming elements due to good wear protection and damping effect
Compatible with electronic control systems, elastane fibres and commonly used sealing materials and plastics due to the special base oils and additives
Improved cold start behaviour due to the semi-synthetic formulation
Higher economical efficiency of knitting machines due to reduced downtime
Reduction of operating costs due to extended maintenance intervals

Orther products

Product

Features, Application

Kluber Silvertex R 14

Cleaning oil for needles and sinkers in knitting machines
Kluber Silvertex R 14 is a cleaning oil based on paraffinic hydrocarbons.
Kluber Silvertex R 14 contains special additives providing a load-bearing lubricating film which ensures adequate lubrication also during the cleaning process.

Petamo GY 193

Tried-and-tested grease for the high-temperature and long-term lubrication of rolling bearings
PETAMO GY 193 is a synthetic high-temperature grease based on high-quality ester oils, polyurea thickener and special additives. The grease stands out for its excellent water resistance and corrosion protection.
With an above average base oil viscosity of approx. 160 mm²/s at 40°C, PETAMO GY 193 is suitable for manifold applications in machine building

Kluber Silvertex W 22

Biodegradable high-performance needle and sinker oils
In the knitting industry, requirements in terms of consistent product quality, compatibility of materials, wear protection and scourability are becoming more and more stringent. Kluber Silvertex W needle oils are based on special mineral base oils and additives. These oils are biodegradable according to OECD - 301 c. They reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time reducing operating costs.

Kluberplex BE 31-222

Lubricating greases for extreme requirements
Kluberplex BE 31-102…-222…-502 are lubricating greases based on mineral oil and special calcium soap. They offer high resistance to mechano-dynamical loads and good adhesion properties. Kluberplex BE 31-102…-222…-502 are highly resistant to media, water and water vapour.

Kluberquiet BQH 72-102

High-purity rolling bearing grease for long-term lubrication
Kluberquiet BQH 72-102 is a synthetic high-temperature lubricating grease. Due to the careful selection of product components and the clean manufacturing environment, Kluberquiet It is a rolling bearing grease with a particularly low noise level. It offers excellent performance characteristics thanks to a high-quality ester oil, a new polyurea thickener and special additives. It is special in that it combines high-temperature resistance and extreme purity.

Kluber Summit SB 46, 68

Synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Kluber Summit SB oils are air compressor oils based on synthetic hydrocarbons and additives. These oils are miscible with mineral oils and synthetic hydrocarbon oils, but not with oils based on polyglycol.
Kluber Summit SB oils offer excellent oxidation and ageing stability and show a good viscosity-temperature behaviour.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416