Klubersynth BZ 68-400

Light-coloured special lubricant for open drives
Klubersynth AG 14-61 has been especially designed for girth gear/pinion drives and plain bearings in wind turbines. The lubricant is resistant to high loads and provides very good corrosion protection properties. It can be used in a wide service temperature range and is therefore pumpable at temperatures as low as minus 30°C. The grease offers good pressure and wear resistance and is free from inorganic solid lubricants like MoS2 and graphite. Due to its good compatibility with commercial sealing materials Klubersynth AG 14-61 is suitable for wide ranging applications.

High-purity rolling bearing grease for long-term lubrication
Kluberquiet BQH 72-102 is a synthetic high-temperature lubricating grease. Due to the careful selection of product components and the clean manufacturing environment, Kluberquiet It is a rolling bearing grease with a particularly low noise level. It offers excellent performance characteristics thanks to a high-quality ester oil, a new polyurea thickener and special additives. It is special in that it combines high-temperature resistance and extreme purity.

Lubricant for rolling and plain bearings subject to high loads
Kluberplex BEM 41-141 offers good pressure and wear resistance and does not contain any inorganic solid lubricants like MoS2 or graphite.
Due to its good compatibility with commercial sealing materials, the grease can be used for a wide range of applications.

Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Klubersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on PAO. Klubersynth GEM 4 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GEM 4 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.

Eco-compatible operating lubricant for open gear drives
Kluberbio LG 39-701 N is a high-performance grease with a new type of base oil and additive package. It combines very good eco-friendliness with high load-carrying capacity, good antiwear and anticorrosive effect and excellent adhesion to surfaces.
The high-viscosity base oil of Kluberbio LG 39-701 N comes from 100 % renewable resources.
Kluberbio LG 39-701 N complies with the 2013 Vessel General Permit requirements of the Environmental Protection Agency (EPA) in terms of biodegradability, minimal toxicity and bio-accumulation to be met by Environmentally Acceptable Lubricants.
Due to the lubricant's excellent low-temperature behaviour, it can be pumped in centralised lubricating systems down to -30°C and sprayed even below 0°C. These positive product characteristics enable you to use the lubricant over a wider temperature range than is common with mineral-oil-based greases of the same base oil viscosity.

Lubricating and assembly paste
ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants.
Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.