Klubertop TP 22-1310 A/B

Thermosetting bonded coating
Klubertop TG 05 N is a thermo-setting, grey-black bonded coating based on graphite and an organic binding agent. Once applied and hardened, the coating forms a dry lubricant layer which has a very wide service temperature range and a low friction coefficient, ensures that there is no stick slip at low speeds, has a long service life and is very resistant to wear. In addition, this product has an excellent resistance to oil, and chemicals. It also provides good corrosion protection on phosphated surfaces.

Water-miscible two-component bonded coating for sealing rings and coloured elastomers
Klubertop TP 36-1300 NP A/B is a colourless two-component bonded coating for elastomers and thermoplastics.
Klubertop TP 36-1300 NP A/B forms a nearly colourless dry film, it is particularly suitable for coloured seals and O-rings where increased operational reliability and colour fastness are equally important.
The bonded coating offers excellent adhesion on materials like EPDM, TPE, NBR, HNBR, FPM and PA.

Water-miscible, two-component bonded coatings for automotive body seals
Klubertop TP 22, 27 and 31-1310 A/B are air-hardening, black two-component bonded coatings with varying solid matter content plus an organic, water-miscible binding agent. The products offer good adhesion to e.g. EPDM, TPE, FPM, PUR.

Two-component bonded coating for metal components
Klubertop TP 42 N A-B is a thermosetting, two-component, black-coloured bonded coating. It has an organic binder containing PTFE-free wear protection additives.
Klubertop TP 42 N A-B reduces friction and wear in metal/metal combinations. It has a particularly high level of wear resistance and a relatively high friction coefficient for a bonded coating.

Water-miscible two-component structural bonded coating for highly stressed profiled seals in motor vehicles
Klubertop TP 37-1310 A/B P is an air-drying, water-miscible two-component bonded coatings with an excellent friction and wear behaviour.
Klubertop TP 37-1310 A/B P offers excellent adhesion on all kinds of elastomer types such as EPDM, TPE, FPM, PUR etc.

Water-miscible, two-component bonded coatings with different contents of solid matter for automotive body seals
Klubertop TP 22-1310 N /A/B and Klubertop TP 27-1310 are black two-component bonded coating cross-linking at ambient temperature which contain special solid matter and an organic, water-miscible binding agent. The bonded coating offers good adhesion to e.g. EPDM, TPE, FPM, PUR etc.