Water-based heat-setting single-component bonded coating free from co-solvent for visible elastomers
Klubertop TP 28-1311 is a black, single-component bonded coating for elastomers. It is a heat-setting lubricant and therefore particularly suitable for online application on sponge and conventional rubber profiles.
One of the main advantages of this product is its good adhesion on various elastomers.
Water-miscible two-component bonded coating for sealing rings and coloured elastomers
Klubertop TP 36-1300 NP A/B is a colourless two-component bonded coating for elastomers and thermoplastics.
Klubertop TP 36-1300 NP A/B forms a nearly colourless dry film, it is particularly suitable for coloured seals and O-rings where increased operational reliability and colour fastness are equally important.
The bonded coating offers excellent adhesion on materials like EPDM, TPE, NBR, HNBR, FPM and PA.
Klubertop TP 38-901 is a water-miscible, thermosetting for the food-processing, drinking water and pharmaceutical industries.
The dry film provided by Klubertop TP 38-901 fulfils the following requirements:
European and German regulations on food-grade products (FABES certificate CON 6222-2018).
Klubertop TP 38-901 is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
Water-miscible, two-component bonded coatings with different contents of solid matter for automotive body seals
Klubertop TP 22-1310 N/A/B and Klubertop TP 27-1310 are black two-component bonded coating cross-linking at ambient temperature which contain special solid matter and an organic, water-miscible binding agent. The bonded coating offers good adhesion to e.g. EPDM, TPE, FPM, PUR etc.
Water-miscible, two-component bonded coatings with different contents of solid matter for automotive body seals
Klubertop TP 22-1310 N /A/B and Klubertop TP 27-1310 are black two-component bonded coating cross-linking at ambient temperature which contain special solid matter and an organic, water-miscible binding agent. The bonded coating offers good adhesion to e.g. EPDM, TPE, FPM, PUR etc.
Thermosetting bonded coating
Klubertop TG 05 N is a thermo-setting, grey-black bonded coating based on graphite and an organic binding agent. Once applied and hardened, the coating forms a dry lubricant layer which has a very wide service temperature range and a low friction coefficient, ensures that there is no stick slip at low speeds, has a long service life and is very resistant to wear. In addition, this product has an excellent resistance to oil, and chemicals. It also provides good corrosion protection on phosphated surfaces.
Two-component bonded coating for metal components
Klubertop TP 41 N A/B is a thermosetting, black-coloured high-performance bonded coating made up of two component parts. It has an organic binder containing PTFE-free solid lubricants.
This bonded coating reduces friction and wear on metal/metal and metal/plastic material pairings. It can be used for high mechano-dynamic loads as well as with high temperatures.
Klubertop TP 41 N A/B excels due to its excellent high wear resistance plus good adhesion on steel and aluminium substrates.
