Klubertop TP 42 A/B

Manufacturer: KLÜBER LUBRICATION (Germany)
Two-component bonded coating for metal components
Klubertop TP 42 N A-B is a thermosetting, two-component, black-coloured bonded coating. It has an organic binder containing PTFE-free wear protection additives.
Klubertop TP 42 N A-B reduces friction and wear in metal/metal combinations. It has a particularly high level of wear resistance and a relatively high friction coefficient for a bonded coating.
Benefits for your application
  • Good component performance achieved
    • through very good wear resistance
    • through very good chemical resistance
    • through delayed tribo-corrosion
    • for a wide service temperature
    • particularly when applied in a double layer system together with Klübertop TP N 41 A-B
    • as layers of a thickness of up to 40 μm can be applied
  • Lubricated clean and dry surfaces
    • no contamination or lubricant loss
    • no adhesive bonding effect of lubricated components

Orther products

Product
Features, Application
Water-miscible, two-component bonded coatings for automotive body seals
Klubertop TP 22, 27 and 31-1310 A/B are air-hardening, black two-component bonded coatings with varying solid matter content plus an organic, water-miscible binding agent. The products offer good adhesion to e.g. EPDM, TPE, FPM, PUR.
Water-miscible, two-component bonded coatings with different contents of solid matter for automotive body seals
Klubertop TP 22-1310 N /A/B and Klubertop TP 27-1310 are black two-component bonded coating cross-linking at ambient temperature which contain special solid matter and an organic, water-miscible binding agent. The bonded coating offers good adhesion to e.g. EPDM, TPE, FPM, PUR etc.
Klubertop TP 38-901 is a water-miscible, thermosetting for the food-processing, drinking water and pharmaceutical industries.
The dry film provided by Klubertop TP 38-901 fulfils the following requirements:
  • European and German regulations on food-grade products (FABES certificate CON 6222-2018).
  • Klubertop TP 38-901 is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
Thermosetting bonded coating for high loads and good corrosion protection
Once applied and hardened, the coating ensures:
  • good wear resistance
  • excellent corrosion protection
  • wide service temperature range
  • no stick-slip at low relative speeds
  • excellent wear protection on zinc-phosphated surfaces
Water-miscible two-component bonded coating for sealing rings and coloured elastomers
Klubertop TP 36-1300 NP A/B is a colourless two-component bonded coating for elastomers and thermoplastics.
Klubertop TP 36-1300 NP A/B forms a nearly colourless dry film, it is particularly suitable for coloured seals and O-rings where increased operational reliability and colour fastness are equally important.
The bonded coating offers excellent adhesion on materials like EPDM, TPE, NBR, HNBR, FPM and PA.
Water-based heat-setting single-component bonded coating free from co-solvent for visible elastomers
Klubertop TP 28-1311 is a black, single-component bonded coating for elastomers. It is a heat-setting lubricant and therefore particularly suitable for online application on sponge and conventional rubber profiles.
One of the main advantages of this product is its good adhesion on various elastomers.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16