PF-62

Manufacturer: HABASIT (Switzerland)
The PF-62 is a hot pressing device for joining of Habasit power transmission belts made of thermoplastics up to a width of 60 mm and a thickness of 3,6 mm with the Flexproof method.

Orther products

Product
Features, Application
AFZ-1200

AFZ-1200

Mã SP:
The AFZ-1200 is used for efficient die-cutting of Habasit belts and tapes up to a width of 1,250 mm and a thickness of 8 mm for the Flexproof or Step-Flex (only two-ply belts) joining methods. It is suitable for all standard Habasit finger geometries with a pitch of 10 mm or 20 mm
AF-100/US

AF-100/US

Mã SP:
The AF-100/US is a device for preparing (die-cutting) Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm for Flexproof (finger) joints.
PT-50

PT-50

Mã SP:
Hot-pressing device for Thermofix joining of belts up to 50 mm wide and 2 mm thick. It is especially suitable for offline joining of spindle tapes and machine tapes
PF-101

PF-101

Mã SP:
The PF-101 is a hot-pressing device for joining of Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm. Maximum finger length is 80 mm. It is designed mainly for Flexproof but Thermofix is also possible.
AT-60

AT-60

Mã SP:
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance.
PM-459

PM-459

Mã SP:
Equipped with 160 platens, Model PM-459 features 450 mm max belt width. Units include insulation to avoid excessive heating of press body, and plastic sliding pad on bottom of press to prevent damage to conveyors during installation and to optimize stability during joining.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16