The AF-100/US is a device for preparing (die-cutting) Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm for Flexproof (finger) joints.
The AT-306 is a preparing device for skiving of Habasit belts up to a width of 300 mm and a thickness of 8 mm.
The AT-306 is especially suitable for preparation of Thermofix joints of power transmission belts in the fabrication workshop in large series.
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance.
The PM-1604 is a hot pressing device for Thermofix, Flexproof, and Step-Flex joining of Habasit belts and tapes up to a width of 1,600 mm and a thickness of 10 mm.
The SM-1203 is a cutting machine to longitudinally cut Habasit belts and tapes up to a width of 1,410 mm and a thickness of 10 mm (depending on material).
The PM-3204 are a range of hot-pressing devices for joining of Habasit belts. They are capable of Thermofix (skived) Flexproof (finger) and Step-Flex (finger over finger) joining of all Habasit belts which can be joined in the standard temperature range
The PT-300 is a hot-pressing device designed for joining Habasit driving and conveyor belts up to 300 mm wide and 8 mm thick using the Thermofix procedure. The hot-pressing device PT-300 is suitable for both workshop and portable use.