The PM-1604 is a hot pressing device for Thermofix, Flexproof, and Step-Flex joining of Habasit belts and tapes up to a width of 1,600 mm and a thickness of 10 mm.
Hot-pressing device for Thermofix joining of belts up to 50 mm wide and 2 mm thick. It is especially suitable for offline joining of spindle tapes and machine tapes
The PM-3604 is a hot pressing device for Thermofix, Flexproof, and Step-Flex joining of Habasit belts and tapes up to a width of 3,600 mm and a thickness of 10 mm.
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance.
The AF-61/0 is a preparing device (die-cutting tool) for 8x30 mm Flexproof finger geometry. It is designed mainly for Habasit machine tapes and belts up to 3 mm thickness. The AF-61/0 has a movable cutting head with two blades. It can be positioned by a pin in steps of 8 mm, ensuring the required accuracy.
The PT-300 is a hot-pressing device designed for joining Habasit driving and conveyor belts up to 300 mm wide and 8 mm thick using the Thermofix procedure. The hot-pressing device PT-300 is suitable for both workshop and portable use.