AT-200

Manufacturer: HABASIT (Switzerland)
The AT-200 is a preparing device for skiving of Habasit belts and tapes up to a width of 200 mm and a thickness of 7 mm. The AT-200 is suitable for preparation of belts and tapes in small- to medium-sized series.

Orther products

Product
Features, Application
AF-100/US

AF-100/US

Mã SP:
The AF-100/US is a device for preparing (die-cutting) Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm for Flexproof (finger) joints.
AT-201

AT-201

Mã SP:
The AT-201 is a preparing device for skiving of Habasit belts and tapes up to a width of 200 mm. The AT-201 is suitable for preparation of belts and tapes in small- to medium-sized series.
PM-459

PM-459

Mã SP:
Equipped with 160 platens, Model PM-459 features 450 mm max belt width. Units include insulation to avoid excessive heating of press body, and plastic sliding pad on bottom of press to prevent damage to conveyors during installation and to optimize stability during joining.
PQ-59

PQ-59

Mã SP:
Hot-pressing device for joining of thermoplastic belts up to 50 mm wide and 3.6 mm thick. Specifcally designed for machine tapes and spindle tapes.
SM-1203

SM-1203

Mã SP:
The SM-1203 is a cutting machine to longitudinally cut Habasit belts and tapes up to a width of 1,410 mm and a thickness of 10 mm (depending on material).
AT-60

AT-60

Mã SP:
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16