AT-201

Manufacturer: HABASIT (Switzerland)
The AT-201 is a preparing device for skiving of Habasit belts and tapes up to a width of 200 mm. The AT-201 is suitable for preparation of belts and tapes in small- to medium-sized series.

Orther products

Product
Features, Application
PF-101

PF-101

Mã SP:
The PF-101 is a hot-pressing device for joining of Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm. Maximum finger length is 80 mm. It is designed mainly for Flexproof but Thermofix is also possible.
PM-459

PM-459

Mã SP:
Equipped with 160 platens, Model PM-459 features 450 mm max belt width. Units include insulation to avoid excessive heating of press body, and plastic sliding pad on bottom of press to prevent damage to conveyors during installation and to optimize stability during joining.
PQ-59

PQ-59

Mã SP:
Hot-pressing device for joining of thermoplastic belts up to 50 mm wide and 3.6 mm thick. Specifcally designed for machine tapes and spindle tapes.
PQ-02

PQ-02

Mã SP:
Quickmelt welding tool, designed for joining round belts. It consists of a W-01 welder and CQ-02 clamping device
 
PF-62

PF-62

Mã SP:
The PF-62 is a hot pressing device for joining of Habasit power transmission belts made of thermoplastics up to a width of 60 mm and a thickness of 3,6 mm with the Flexproof method.
AT-200

AT-200

Mã SP:
The AT-200 is a preparing device for skiving of Habasit belts and tapes up to a width of 200 mm and a thickness of 7 mm. The AT-200 is suitable for preparation of belts and tapes in small- to medium-sized series.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16