The AF-61/0 is a preparing device (die-cutting tool) for 8x30 mm Flexproof finger geometry. It is designed mainly for Habasit machine tapes and belts up to 3 mm thickness. The AF-61/0 has a movable cutting head with two blades. It can be positioned by a pin in steps of 8 mm, ensuring the required accuracy.
The PM-1604 is a hot pressing device for Thermofix, Flexproof, and Step-Flex joining of Habasit belts and tapes up to a width of 1,600 mm and a thickness of 10 mm.
The PF-101 is a hot-pressing device for joining of Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm. Maximum finger length is 80 mm. It is designed mainly for Flexproof but Thermofix is also possible.
The AT-201 is a preparing device for skiving of Habasit belts and tapes up to a width of 200 mm. The AT-201 is suitable for preparation of belts and tapes in small- to medium-sized series.
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance.
The SM-1203 is a cutting machine to longitudinally cut Habasit belts and tapes up to a width of 1,410 mm and a thickness of 10 mm (depending on material).
