PQ-59

Manufacturer: HABASIT (Switzerland)
Hot-pressing device for joining of thermoplastic belts up to 50 mm wide and 3.6 mm thick. Specifcally designed for machine tapes and spindle tapes.

Orther products

Product
Features, Application
PF-62

PF-62

Mã SP:
The PF-62 is a hot pressing device for joining of Habasit power transmission belts made of thermoplastics up to a width of 60 mm and a thickness of 3,6 mm with the Flexproof method.
PT-300

PT-300

Mã SP:
The PT-300 is a hot-pressing device designed for joining Habasit driving and conveyor belts up to 300 mm wide and 8 mm thick using the Thermofix procedure. The hot-pressing device PT-300 is suitable for both workshop and portable use.
PM-459

PM-459

Mã SP:
Equipped with 160 platens, Model PM-459 features 450 mm max belt width. Units include insulation to avoid excessive heating of press body, and plastic sliding pad on bottom of press to prevent damage to conveyors during installation and to optimize stability during joining.
AFZ-1200

AFZ-1200

Mã SP:
The AFZ-1200 is used for efficient die-cutting of Habasit belts and tapes up to a width of 1,250 mm and a thickness of 8 mm for the Flexproof or Step-Flex (only two-ply belts) joining methods. It is suitable for all standard Habasit finger geometries with a pitch of 10 mm or 20 mm
AT-60

AT-60

Mã SP:
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance.
PM-3604

PM-3604

Mã SP:
The PM-3604 is a hot pressing device for Thermofix, Flexproof, and Step-Flex joining of Habasit belts and tapes up to a width of 3,600 mm and a thickness of 10 mm.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16