The PM-3204 are a range of hot-pressing devices for joining of Habasit belts. They are capable of Thermofix (skived) Flexproof (finger) and Step-Flex (finger over finger) joining of all Habasit belts which can be joined in the standard temperature range
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance.
The PF-62 is a hot pressing device for joining of Habasit power transmission belts made of thermoplastics up to a width of 60 mm and a thickness of 3,6 mm with the Flexproof method.
The PF-101 is a hot-pressing device for joining of Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm. Maximum finger length is 80 mm. It is designed mainly for Flexproof but Thermofix is also possible.
The AT-200 is a preparing device for skiving of Habasit belts and tapes up to a width of 200 mm and a thickness of 7 mm. The AT-200 is suitable for preparation of belts and tapes in small- to medium-sized series.
The AT-201 is a preparing device for skiving of Habasit belts and tapes up to a width of 200 mm. The AT-201 is suitable for preparation of belts and tapes in small- to medium-sized series.
Hot-pressing device for Thermofix joining of belts up to 50 mm wide and 2 mm thick. It is especially suitable for offline joining of spindle tapes and machine tapes
.jpg)
.jpg)
_thumbcr_122x83.jpg)
_thumbcr_122x83.jpg)
