Isoflex Topas L 32, 32 N

Spindle bearing grease
ISOFLEX NBU 15 is a high-speed grease with a good pressure absorption capacity.
It consists of a combination of ester oil, synthetic hydrocarbon oil and mineral oil and a barium complex soap. It offers good protection against wear and corrosion and is resistant to water, media and oxidation.

High-speed grease for gears
CENTOPLEX CX 4/375 AU is a special lubricating grease based on mineral oil and lithium soap. It is a very soft grease of consistency grade 0.

High-temperature and long-term grease for rolling bearings
Kluberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.

Lubricating grease for high temperatures and speeds
Kluberalfa lubricants based on perfluorinated polyether (PFPE) have been developed for specific applications where optimum performance under lifetime lubrication conditions is required.
Kluberalfa BF 83-102 has been designed to ensure long service life of rolling bearings subject to high speeds and very high permanent temperatures. Kluberalfa BF 83-102 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.

Low-noise rolling bearing grease for the long-term lubrication of high-speed rolling bearings
Kluberquiet BQ 74-73 N is a rolling bearing grease based on synthetic hydrocarbon, ester oil and urea. It was especially developed for the lubrication of high-speed ball bearings operating at high temperatures.

Fully synthetic high-performance oils for high-speed can closing machines
The Kluberfood NH1 M 4-100, -150, -220 oils are mineral oil-free products based on synthetic hydrocarbons.
Klüberfood NH1 M 4-100, -150, -220 oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. In addition to their good anti-corrosion properties, Klüberfood NH1 M 4-series has a very good oil and water absorption behaviour.