Klubersynth GEM 4-32….680 N

Manufacturer: KLÜBER LUBRICATION (Germany)

Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Klubersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on PAO. Klubersynth GEM 4 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GEM 4 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.

Benefits for your application

High scuffing protection
Excellent wear protection for gears and rolling bearings
Good shear stability for reliable lubricant film formation
High micropitting resistance
Excellent ageing and oxidation resistance
Wide service temperature range due to good viscosity-temperature behaviour
Low foaming tendency
Energy savings due to optimised friction behaviour
Good elastomer compatibility
Klubersynth GEM 4-320 N is approved for use in wind power plants by Winergy, Moventas, ZF WP, Bosch Rexroth...

Orther products

Product

Features, Application

Kluber Summit SB 46, 68

Synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Kluber Summit SB oils are air compressor oils based on synthetic hydrocarbons and additives. These oils are miscible with mineral oils and synthetic hydrocarbon oils, but not with oils based on polyglycol.
Kluber Summit SB oils offer excellent oxidation and ageing stability and show a good viscosity-temperature behaviour.

ISOFLEX PDP 65

Synthetic long-term oils
ISOFLEX PDP oils are synthetic long-term oils based on ester oil. They show a good viscosity-temperature behaviour, a high flash point, a low pour point, good aging and oxidation stability as well as corrosion protection. Compared to mineral oils, they hardly change their viscosity at low or high temperatures thus ensuring less decrease in performance and reduced power consumption.

Kluber Madol 172 Supreme, 183 Supreme

Needle and sinker oils for hosiery and flat-bed knitting machinery
Kluber Madol 100 oils based on special mineral base oils and additives.
They ensure reliable wetting of the friction points in your knitting machine, keep needle grooves clean and extend the needle life.
The oils' good oxidation stability contribute to reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time keeping maintenance costs to a minimum.

Kluber Silvertex W 22

Biodegradable high-performance needle and sinker oils
In the knitting industry, requirements in terms of consistent product quality, compatibility of materials, wear protection and scourability are becoming more and more stringent. Kluber Silvertex W needle oils are based on special mineral base oils and additives. These oils are biodegradable according to OECD - 301 c. They reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time reducing operating costs.

Kluber Madol 920 N

Easily scourable, wear-protecting needle and sinker oils
Kluber Madol 920 N oil based on special mineral base oils and additives.
It ensure reliable wetting of the friction points in your knitting machine, keep needle grooves clean and extend the needle life.
The oil' good oxidation stability contribute to reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time keeping maintenance costs to a minimum.

CONTRAKOR FLUID H 1 Spray

Long-term corrosion preventive, effective rust remover
CONTRAKOR FLUID H 1 is a thin-bodied, versatile lubricant based on mineral oil.
This long-term anti-corrosion agent offers excellent lubricity, improves sliding and has good penetrating properties, which makes it highly effective for use as a rust remover.
It is particularly useful in workshops, where a wide variety of lubricating jobs require quick and uncomplicated handling.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416